Beiträge von LGM

    Hallo zusammen.
    Ich brauche Euren Rat.
    Ich gehe per UPC Cablecom ins Internet und habe dafür ein Cablecom Modem.
    Das Modem habe ich an eine Zyxel WlanRouter NBG 5715 angeschlossen, von dort geht es auf einen
    Netgear Switch.
    Nun hängt sich der Zyxel WlanRouter NBG 5715 alle 3 bis 4 Tage auf.
    Das heißt per Webinterface ist der Router nicht erreichbar und in Windows erscheint die Meldung keine Netzwerkverbindung.
    Erst nach dem betätigen des ein Aus/Tasters geht alles wieder.
    Die Firmware des Routers ist auf dem neusten stand.
    Den Zyxel WlanRouter NBG 5715 habe ich auch schon per Reset taste komplett gelöscht und neu eingerichtet.
    Ich habe schon versuchsweise allen PCs, NAS,TVs,Mobilefons und Tabletts eine Feste IP Adresse vergeben. Dies brachte auch keine Abhilfe.
    Kann es sein das der Zyxel Router an seine Leistungsgrenze kommt und sich dann aufhängt?

    Wenn ja, habt Ihr mir einen Tipp durch welches Gerät ich es ersetzen soll?
    Oder wie kann ich den Router schützen das er nicht überlastet?
    Ich habe mir überlegt einen Router ohne Wlan zu kaufen und einen Acces Point an den Switch anzuschließen.
    Aber ich finde Nur Router welche auch Wlan bereits integriert haben.
    Router ohne Wlan finde ich nicht zu kaufen.
    Ich dachte Router und Wlan als 2 getrennte Geräte, damit die Geräte nicht so an Ihre Leistungsgrenze kommen.
    Was meint Ihr?
    Oder gibt es heute Wlan Router die deutlich besser und Leistungsfähiger sind als dieser Zyxel Wlan NBG 5715 Wlan Router?
    Ich freu mich auf Eure Tipps und Ideen.
    Und wünsch schon allen mal einen schönen Abend.

    Hallo ich Persönlich habe das Samsung Galaxy Tab 2 GTP 5110 Tablet.
    Es ist ein 10 Zoll Tablet also eher Gross.
    Du musst Dir überlegen ob Du überall ins Internet willst, dann benötigst Du eines mit SimKarten Slot, oder wie ich eines ohne Sim Karte, also nur mit Wlan.
    Mir war die Original Software zu langsam deshalb habe ich eine Custom Software installiert.
    Cyanogenmod mit dieser Software läuft das Tablet genial flüssig.
    Ja man kann spiele spielen, im Google Play Store kann man diese runterladen/kaufen.
    Ja auch Bücher kann man schon kaufen.
    Fotos kannst Du per Integrierter Kamera machen und abspeichern. Wenn Du willst kannst Du den Speicher per zusätzlicher Externer micro Speicherkarte erweitern.
    Was ich empfehle eine Hülle, Schutzhülle, Case wo das Tablet sauber eingepakt und geschützt ist.
    Das Display spiegelt stark in der Sonne. Mein Tablett habe ich gekauft als es ein Aktionsangebot war. Preis Leistung stimmt meiner Meinung nach bei diesem Tablet.
    Was eher schlecht ist man kann es nicht an den TV anschliesen und es hat keinen USB anschluss, dies muss zusätzlich mit einem Adapterkabel nachgerüstet werden.
    Ich denke du musst Dir überlegen welche Grösse 7 Zoll oder 10 Zoll Du Deiner Tochter kaufst, es muss ja in die Handtasche passen und Optisch zur Handtasche. Smile

    Weiter sind die meisten Tablets auf Android basis ausser Du kaufst ein Apple I Pad.
    Ich finde es eine Tolle idee von Dir. Es gibt nichts schöneres wenn die Augen der Tochter vor Freude glänzen.

    Und hier die Daten vom Extended Self Thest:

    smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-win7(64)-sp1] (sf-5.43-1)
    Copyright (C) 2002-12 by Bruce Allen, smartmontools

    === START OF INFORMATION SECTION ===
    Model Family: Seagate Barracuda 7200.12
    Device Model: ST3500418AS
    Serial Number: 9VM2834H
    LU WWN Device Id: 5 000c50 015745fc6
    Firmware Version: HP22
    User Capacity: 500'107'862'016 bytes [500 GB]
    Sector Size: 512 bytes logical/physical
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: 8
    ATA Standard is: ATA-8-ACS revision 4
    Local Time is: Mon Jun 03 23:20:30 2013 MS
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled

    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED

    General SMART Values:
    Offline data collection status: (0x82) Offline data collection activity
    was completed without error.
    Auto Offline Data Collection: Enabled.
    Self-test execution status: ( 0) The previous self-test routine completed
    without error or no self-test has ever
    been run.
    Total time to complete Offline
    data collection: ( 600) seconds.
    Offline data collection
    capabilities: (0x5b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    No Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 93) minutes.
    SCT capabilities: (0x103f) SCT Status supported.
    SCT Error Recovery Control supported.
    SCT Feature Control supported.
    SCT Data Table supported.

    SMART Attributes Data Structure revision number: 10
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x002f 117 099 006 Pre-fail Always - 151853264
    3 Spin_Up_Time 0x0023 098 097 000 Pre-fail Always - 0
    4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2404
    5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 4
    7 Seek_Error_Rate 0x002f 081 060 030 Pre-fail Always - 162814663
    9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 5443
    10 Spin_Retry_Count 0x0033 100 100 097 Pre-fail Always - 0
    12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2404
    184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
    187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
    188 Command_Timeout 0x0032 100 097 000 Old_age Always - 26
    189 High_Fly_Writes 0x003a 099 099 000 Old_age Always - 1
    190 Airflow_Temperature_Cel 0x0022 069 061 045 Old_age Always - 31 (Min/Max 24/32)
    194 Temperature_Celsius 0x0022 031 040 000 Old_age Always - 31 (0 16 0 0 0)
    195 Hardware_ECC_Recovered 0x003a 036 022 000 Old_age Always - 151853264
    196 Reallocated_Event_Count 0x0032 100 100 036 Old_age Always - 4
    197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
    198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0

    SMART Error Log Version: 1
    No Errors Logged

    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Extended offline Completed without error 00% 5443 -
    # 2 Short offline Completed without error 00% 5440 -
    # 3 Short offline Completed without error 00% 4858 -
    # 4 Short offline Aborted by host 10% 4420 -
    # 5 Short offline Completed without error 00% 3821 -
    # 6 Short offline Completed without error 00% 3449 -
    # 7 Short offline Completed without error 00% 1680 -
    # 8 Short offline Completed without error 00% 296 -
    # 9 Short offline Completed without error 00% 4 -
    #10 Short offline Completed without error 00% 3 -
    #11 Short offline Completed without error 00% 2 -
    #12 Short offline Completed without error 00% 2 -
    #13 Short offline Completed without error 00% 0 -

    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.

    gsmartcontroll Kurztest ohne Fehlermeldung: (Langtest in Arbeit folgt noch)


    smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-win7(64)-sp1] (sf-5.43-1)
    Copyright (C) 2002-12 by Bruce Allen, smartmontools

    === START OF INFORMATION SECTION ===
    Model Family: Seagate Barracuda 7200.12
    Device Model: ST3500418AS
    Serial Number: 9VM2834H
    LU WWN Device Id: 5 000c50 015745fc6
    Firmware Version: HP22
    User Capacity: 500'107'862'016 bytes [500 GB]
    Sector Size: 512 bytes logical/physical
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: 8
    ATA Standard is: ATA-8-ACS revision 4
    Local Time is: Mon Jun 03 20:57:29 2013 MS
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled

    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED

    General SMART Values:
    Offline data collection status: (0x82) Offline data collection activity
    was completed without error.
    Auto Offline Data Collection: Enabled.
    Self-test execution status: ( 0) The previous self-test routine completed
    without error or no self-test has ever
    been run.
    Total time to complete Offline
    data collection: ( 600) seconds.
    Offline data collection
    capabilities: (0x5b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    No Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 93) minutes.
    SCT capabilities: (0x103f) SCT Status supported.
    SCT Error Recovery Control supported.
    SCT Feature Control supported.
    SCT Data Table supported.

    SMART Attributes Data Structure revision number: 10
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x002f 117 099 006 Pre-fail Always - 120236283
    3 Spin_Up_Time 0x0023 098 097 000 Pre-fail Always - 0
    4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2404
    5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 4
    7 Seek_Error_Rate 0x002f 081 060 030 Pre-fail Always - 162763881
    9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 5440
    10 Spin_Retry_Count 0x0033 100 100 097 Pre-fail Always - 0
    12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2404
    184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
    187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
    188 Command_Timeout 0x0032 100 097 000 Old_age Always - 26
    189 High_Fly_Writes 0x003a 099 099 000 Old_age Always - 1
    190 Airflow_Temperature_Cel 0x0022 073 061 045 Old_age Always - 27 (Min/Max 24/27)
    194 Temperature_Celsius 0x0022 027 040 000 Old_age Always - 27 (0 16 0 0 0)
    195 Hardware_ECC_Recovered 0x003a 042 022 000 Old_age Always - 120236283
    196 Reallocated_Event_Count 0x0032 100 100 036 Old_age Always - 4
    197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
    198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0

    SMART Error Log Version: 1
    No Errors Logged

    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Short offline Completed without error 00% 5440 -
    # 2 Short offline Completed without error 00% 4858 -
    # 3 Short offline Aborted by host 10% 4420 -
    # 4 Short offline Completed without error 00% 3821 -
    # 5 Short offline Completed without error 00% 3449 -
    # 6 Short offline Completed without error 00% 1680 -
    # 7 Short offline Completed without error 00% 296 -
    # 8 Short offline Completed without error 00% 4 -
    # 9 Short offline Completed without error 00% 3 -
    #10 Short offline Completed without error 00% 2 -
    #11 Short offline Completed without error 00% 2 -
    #12 Short offline Completed without error 00% 0 -

    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.

    Da ich ein gebranntes Kind bin und weiss was Datenverlust heisst prüfe ich meine Festplatten mit HD Tune und GSmart Control.
    Ein Backup habe ich, sogar die Festplatte ist geklont.
    Bei HD Tune und bei G Smart Control zeigt es mir Fehler von der Festplatte an am Schluss steht jedoch im Status OK.
    Folgende drei Werte sind markiert:
    05 Reallocate Sector Count
    0A Spin Retry Count
    B8 unknown attribute

    Was bedeutet dies nun ist die Festplatte kurz vor dem Ende oder kann ich dies vernachlässigen?

    Harddisk Typ Seagate Barracuda 7200.12 500 GB

    Mit Windows habe ich die Festplatte auf Fehler geprüft dort ist alles in Ordnung, der PC läuft auch ohne Fehler.
    Der HD Tune Error Scan ist auch in Ordnung.
    Genaue Daten seht Ihr auf den Bildern.
    Danke für Eure Infos.

    [Blockierte Grafik: http://s11.postimg.org/6xzzo1qvz/Gsmart_Controll_Daten.jpg]

    [Blockierte Grafik: http://s3.postimg.org/qe2brisdr/HD_Tune_Daten.jpg]

    Welches Mainboard hast Du nun?
    M2N4-SLI Das Neuste Bios ist dort 1301.
    Wenn es das M2N2 SLI ist dann unbedingt auf 1804 Updaten.
    Ein versuch oder Idee wäre noch das Bios zu reseten und oder wenn möglich updaten.
    Weiter wenn möglich im Bios AHCI aktivieren.
    Check Disk der Festplatte durchlaufen lassen.
    und zum Testen DVD Brenner oder CD Laufwerke abhängen.

    @ PCHSwS mit dem Alignment hast Du natürlich recht


    Wenn Comixmo allerdings sein Windows 7 neu installiert und die Festplatte Formatiert und oder Partitioniert spielt das keine Rolle.

    Ich empfehle Dir bevor Du die SSD Festplatte beschreibst die neueste Firmware zu installieren.

    Weiter wenn Comixmo Partition Wizard nimmt und es richtig anwendet sollte es auch keine Problemde geben.
    Siehe: SSD partition alignment in Windows Server 2003 can be realized by MiniTool Partition Wizard.

    Ich muss mich auch mal einklinken.
    Ich bin auch aus der Schweiz.
    Ich habe den Fussnagelindikator-Socken erfunden.
    Immer wenn der Socken ein Loch hat, weiss ich, dass die Fussnägel geschnitten werden müssen.

    Jeder hat seine Meinung.
    Aber ich würde mich an den Support wenden.
    Ausser Du wohnst irgendwo im Dschungel weit weg.
    Leitungsschwankungen ja ab gleich soviel?
    Oder wohnst Du in einem alten Haus mit Maroden Leitungen und alten Steckverbindungen?
    Dann kann es die Geschwindigkeit reduzieren.

    Router neustart oder reset hat oft auch schon geholfen.
    Bitte beachte beim Speedtest alle Hintergrundprogramme welche auf das Internet zugreifen zu schliessen, am besten Wlan ausschalten und Test per Lan Kabel direkt am PC/Laptop.
    Ich hatte dieses Problem in der Schweiz auch.
    Ich schrieb den Support an. Bei mir war die falsche Geschwindigkeit freigeschaltet wurde innert 24 Stunden behoben.
    Gruss LGM und viel Erfolg.