PC hängt sich auf/startet neu

  • Hallo zusammen der PC startet sporadisch von selbst Bild wird schwarz kein Bluescreen und startet neu.
    Geprüft habe ich schon meine 3 Festplatten mit Check Disk und Gsmart Controll diese sind Fehlerfrei.
    Windows 7 Professional wurde schon neu installiert erfolglos.
    Es sind alle Treiber auf Aktuellem Stand.
    Der Fehler tritt meist auf wenn nichts am PC gemacht wird.
    Ich habe Online einen Stresstest gemacht
    http://silver.urih.com/ und die CPU Temperaturen geprüft diese gehen auf 67 Grad hoch mehr aber auch nicht.
    Diesen Test kann ich Stundenlang ohne Fehler laufen lassen.
    In der Ereignisanzeige setzt es immer den Fehler Ereigniss ID 41
    Das System wurde neu gestartet, ohne dass es zuvor ordnungsgemäß heruntergefahren wurde. Dieser Fehler kann auftreten, wenn das System nicht mehr reagiert hat oder abgestürzt ist oder die Stromzufuhr unerwartet unterbrochen wurde.

    Ich startet nun noch Memtest und melde mich wieder.
    Was habt Ihr noch für Ideen was ich noch machen kann?
    Kann es Richtung Netzteil gehen?
    Wenn ja wie prüfe ich dieses?

    • Anzeige

    Hallo!

    Wenn du gerade an deiner Website arbeitest oder dein aktuelles Hosting überdenkst: Wir betreiben mit NetzLiving eine Hosting-Plattform, die speziell auf Performance, Sicherheit und einfache Verwaltung ausgelegt ist.

    • ✔️ Schnelle Ladezeiten (optimiert für WordPress, WoltLab & Co.)
    • ✔️ Deutsche Server & DSGVO-konform
    • ✔️ Persönlicher Support (kein 0815-Ticket-System)

    Mehr erfahren

  • gsmart Controll Log daten


    smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-win7(64)-sp1] (sf-5.43-1)
    Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

    === START OF INFORMATION SECTION ===
    Model Family: SandForce Driven SSDs
    Device Model: OCZ-VERTEX3
    Serial Number: OCZ-LE1L1745517LF36E
    LU WWN Device Id: 5 e83a97 e081659cc
    Firmware Version: 2.25
    User Capacity: 120'034'123'776 bytes [120 GB]
    Sector Size: 512 bytes logical/physical
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: 8
    ATA Standard is: ACS-2 revision 3
    Local Time is: Wed Nov 19 20:09:41 2014 MZ
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled

    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED

    General SMART Values:
    Offline data collection status: (0x02) Offline data collection activity
    was completed without error.
    Auto Offline Data Collection: Disabled.
    Self-test execution status: ( 0) The previous self-test routine completed
    without error or no self-test has ever
    been run.
    Total time to complete Offline
    data collection: ( 0) seconds.
    Offline data collection
    capabilities: (0x7b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 1) minutes.
    Extended self-test routine
    recommended polling time: ( 48) minutes.
    Conveyance self-test routine
    recommended polling time: ( 2) minutes.
    SCT capabilities: (0x0021) SCT Status supported.
    SCT Data Table supported.

    SMART Attributes Data Structure revision number: 10
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x000f 106 106 050 Pre-fail Always - 0/14640261
    5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always - 0
    9 Power_On_Hours_and_Msec 0x0032 095 095 000 Old_age Always - 5165h+23m+23.790s
    12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 875
    171 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 0
    172 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
    174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline - 163
    177 Wear_Range_Delta 0x0000 000 000 000 Old_age Offline - 3
    181 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 0
    182 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
    187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
    194 Temperature_Celsius 0x0022 128 129 000 Old_age Always - 128 (0 127 0 129 0)
    195 ECC_Uncorr_Error_Count 0x001c 120 120 000 Old_age Offline - 0/14640261
    196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0
    201 Unc_Soft_Read_Err_Rate 0x001c 120 120 000 Old_age Offline - 0/14640261
    204 Soft_ECC_Correct_Rate 0x001c 120 120 000 Old_age Offline - 0/14640261
    230 Life_Curve_Status 0x0013 100 100 000 Pre-fail Always - 100
    231 SSD_Life_Left 0x0013 100 100 010 Pre-fail Always - 0
    233 SandForce_Internal 0x0000 000 000 000 Old_age Offline - 7812
    234 SandForce_Internal 0x0032 000 000 000 Old_age Always - 6846
    241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always - 6846
    242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always - 12419

    SMART Error Log not supported
    SMART Self-test Log not supported
    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.


    smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-win7(64)-sp1] (sf-5.43-1)
    Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net


    === START OF INFORMATION SECTION ===
    Model Family: SAMSUNG SpinPoint F3
    Device Model: SAMSUNG HD103SJ
    Serial Number: S246JDWSA17898
    LU WWN Device Id: 5 0024e9 00237b3c3
    Firmware Version: 1AJ100E4
    User Capacity: 1'000'204'886'016 bytes [1.00 TB]
    Sector Size: 512 bytes logical/physical
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: 8
    ATA Standard is: ATA-8-ACS revision 6
    Local Time is: Wed Nov 19 20:13:02 2014 MZ
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled

    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED

    General SMART Values:
    Offline data collection status: (0x00) Offline data collection activity
    was never started.
    Auto Offline Data Collection: Disabled.
    Self-test execution status: ( 25) The self-test routine was aborted by
    the host.
    Total time to complete Offline
    data collection: ( 9180) seconds.
    Offline data collection
    capabilities: (0x5b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    No Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 153) minutes.
    SCT capabilities: (0x003f) SCT Status supported.
    SCT Error Recovery Control supported.
    SCT Feature Control supported.
    SCT Data Table supported.

    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 1
    2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
    3 Spin_Up_Time 0x0023 074 071 025 Pre-fail Always - 8108
    4 Start_Stop_Count 0x0032 096 096 000 Old_age Always - 4429
    5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
    7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
    8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
    9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 5292
    10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
    11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 2
    12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1916
    191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 3
    192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
    194 Temperature_Celsius 0x0002 063 057 000 Old_age Always - 37 (Min/Max 15/43)
    195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
    196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
    197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
    198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
    200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 15
    223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 2
    225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 4465

    SMART Error Log Version: 1
    No Errors Logged

    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Extended offline Aborted by host 90% 5273 -
    # 2 Short offline Completed without error 00% 5273 -
    # 3 Short offline Aborted by host 80% 5273 -
    # 4 Short offline Completed without error 00% 5237 -
    # 5 Short offline Completed without error 00% 2347 -
    # 6 Short offline Completed without error 00% 2342 -
    # 7 Short offline Completed without error 00% 2187 -
    # 8 Short offline Completed without error 00% 2118 -
    # 9 Short offline Completed without error 00% 2012 -
    #10 Short offline Completed without error 00% 2012 -

    Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
    SMART Selective self-test log data structure revision number 0
    Note: revision number not 1 implies that no selective self-test has ever been run
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Aborted_by_host [90% left] (0-65535)
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.

  • und hier noch die Letzte Platte.

    smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-win7(64)-sp1] (sf-5.43-1)
    Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

    === START OF INFORMATION SECTION ===
    Device Model: WDC WD40EFRX-68WT0N0
    Serial Number: WD-WCC4E83R2AUS
    LU WWN Device Id: 5 0014ee 20ab64aec
    Firmware Version: 82.00A82
    User Capacity: 4'000'787'030'016 bytes [4.00 TB]
    Sector Sizes: 512 bytes logical, 4096 bytes physical
    Device is: Not in smartctl database [for details use: -P showall]
    ATA Version is: 8
    ATA Standard is: ACS-2 (revision not indicated)
    Local Time is: Wed Nov 19 20:14:20 2014 MZ
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled

    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED

    General SMART Values:
    Offline data collection status: (0x00) Offline data collection activity
    was never started.
    Auto Offline Data Collection: Disabled.
    Self-test execution status: ( 0) The previous self-test routine completed
    without error or no self-test has ever
    been run.
    Total time to complete Offline
    data collection: (50760) seconds.
    Offline data collection
    capabilities: (0x7b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 508) minutes.
    Conveyance self-test routine
    recommended polling time: ( 5) minutes.
    SCT capabilities: (0x703d) SCT Status supported.
    SCT Error Recovery Control supported.
    SCT Feature Control supported.
    SCT Data Table supported.

    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
    3 Spin_Up_Time 0x0027 186 173 021 Pre-fail Always - 7683
    4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 166
    5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
    7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
    9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 355
    10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
    11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
    12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 134
    192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 19
    193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 543
    194 Temperature_Celsius 0x0022 114 110 000 Old_age Always - 38
    196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
    197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
    198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
    200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0

    SMART Error Log Version: 1
    No Errors Logged

    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Conveyance offline Completed without error 00% 330 -
    # 2 Conveyance offline Completed without error 00% 330 -
    # 3 Short offline Completed without error 00% 330 -
    # 4 Short offline Completed without error 00% 246 -

    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!