Hallo zusammen.
Ich habe ein Problem. Meine SATA Festplatte wird nicht erkannt.
Erstmal meine Daten:
Win XP Prof
Board: Epox 8KRAI KT600 + 8237 AGP set
Samsung SATA 160 GB Festplatte
Rest ist erstmal unwichtig---
Also ich habe mir die neuen Treiber für SATA runtergeladen und eine Diskette erstellt.
Die Festplatte angeklemmt und PC eingeschaltet. WIN Installation hat gestartet und ich habe F6 gedrückt. Die Diskette wurde erkannt und ich habe den Treiber für SATA XP geladen.
Soweit, sogut. Nun kommt das Problem. Die Festplatte wird nicht erkannt. Kann mir da einer helfen?
Hier n Auszug von EPOX README.TXT :
6) Insatll Operating System into HDD of VT6420
1. Install Windows 98SE or Me
* Make sure VT6420 BIOS is executed by the system BIOS when POST.
* Make sure the HDD wanted for installing the OS is in the first hard disk drive (C:\).
* Install OS.
* Run setup.exe after OS is installed.
2. Install Windows NT 4.0, 2000, XP, or Server 2003
* Copy all files and directories from the DriverDisk folder to a floppy disk.
Make sure the following directories and files are copied into the floppy disk.
A:\
\PIDE
\2003IA32
VIApide.inf
VIApdsk.sys
\Win2000
VIApide.inf
VIApdsk.sys
\Winnt40
VIApide.inf
VIApdsk.sys
\WinXP
VIApide.inf
VIApdsk.sys
\SATA
\2003IA32
VIAsraid.inf
VIAsraid.sys
\Win2000
VIAsraid.inf
VIAsraid.sys
\Winnt40
VIAsraid.inf
VIAsraid.sys
\WinXP
VIAsraid.inf
VIAsraid.sys
Txtsetup.oem
VT6420
* Boot system from OS installing CD-ROM.
* Make sure VT6420 BIOS is executed by the system BIOS when POST.
* Press "F6" when OS installer starts running.
* Insert floppy disk.
* Choose the OS device driver wanted for loading.
* Install OS.
* Run setup.exe after OS is installed.
7) Insatll Operating System into SATA HDD of VT8237
1. Install Windows 98SE or Me
* Make sure VT6420 BIOS is executed by the system BIOS when POST.
* Make sure the HDD wanted for installing the OS is in the first hard disk drive (C:\).
* Install OS.
* Run setup.exe after OS is installed.
2. Install Windows NT 4.0, 2000, XP, or Server 2003
* Copy all files and directories of DriverDisk\SATA folder to a floppy disk. Make sure
following directories and files are copied into floppy disk.
A:\
\2003IA32
VIAsraid.inf
VIAsraid.sys
\Win2000
VIAsraid.inf
VIAsraid.sys
\Winnt40
VIAsraid.inf
VIAsraid.sys
\WinXP
VIAsraid.inf
VIAsraid.sys
Txtsetup.oem
VT8237
* Boot system from OS installing CD-ROM.
* Make sure VT6420 BIOS is executed by the system BIOS when POST.
* Press "F6" when OS installer starts running.
* Insert floppy disk.
* Choose the OS device driver wanted for loading.
* Install OS.
* Run setup.exe after OS is installed.
Ich habe den Schritt 7 befolgt für das VT8237.
Meine TreiberDiskette sah auch so aus:
A:\
\2003IA32
VIAsraid.inf
VIAsraid.sys
\Win2000
VIAsraid.inf
VIAsraid.sys
\Winnt40
VIAsraid.inf
VIAsraid.sys
\WinXP
VIAsraid.inf
VIAsraid.sys
Txtsetup.oem
VT8237