Bildschirmgröße bei Suse Linux 9.0 einstellen

  • hallo

    In dem Menü steht man muss die Bildschirmgröße einstellen. Muss ich wohl auch machen da ich einen No Name Monitor habe.

    Da steht X: und Y:

    und dann kann man da nun wert eingeben. Was steht für was? Und wo steht wie hoch und breit mein 17 zoll monitor ist? Ich meine das bild wird ja normal angezeigt.


    danke,ALEX

    • Anzeige

    Hallo!

    Wenn du gerade an deiner Website arbeitest oder dein aktuelles Hosting überdenkst: Wir betreiben mit NetzLiving eine Hosting-Plattform, die speziell auf Performance, Sicherheit und einfache Verwaltung ausgelegt ist.

    • ✔️ Schnelle Ladezeiten (optimiert für WordPress, WoltLab & Co.)
    • ✔️ Deutsche Server & DSGVO-konform
    • ✔️ Persönlicher Support (kein 0815-Ticket-System)

    Mehr erfahren

  • Wenn Du der Meinung bist, das alles ok ist, dann lass die Einstellungen, wie Du sie vorgefunden hast. :)
    x = horizontale Frequenz
    y = vertikale Frequenz

    MfG Karo

  • hi Karo

    da steht aber Bildschirmgröße und nicht Auflösung oder sowas? Also denke ich ma ich muss da eingeben wie breit der monitor ist oder so....... keine ahnung

    da steht Bildschirmgröße in (mm) und da drunter halt x und y und da kann man nen wert eingeben. nur was kommt wo rein?

  • wenn du mm brauchst ... mal sehen

    x*y
    1024*768 = 361,24 mm * 270,93 mm
    800*600 = 282,22 mm * 211,67 mm
    1280x768 = 451,56 mm * 270,93 mm

    ^
    |
    |
    Y
    |
    |
    ------x------>

    Ich hoffe du hast ne gängige Größe
    Genesis

    Aber der Dunst, Moe, der Dunst!

  • hi

    ich meine ja da steht bildschirmgröße. Wollen die da dann nicht die größe der fläche haben? ich kenne mich wie gesagt nicht mit Linux aus und kann mir da nur in einem Forum helfen lassen :)

    In meiner Bedienungsanleitung steht:

    Bildröhre:
    17 " ( 16 sichtbar ) diagonal gemessen

    Bildformat:
    Gesamtgröße: 324 * 244 mm
    Voreingestellte Größe: 305 * 225 mm

    Hoffe das hilft ein wenig weiter :?::!::!::?::!::?::!:

    Danke,ALEX

  • hi Karo


    also ich kopiere dir das mal hier rein was da steht hoffe das ist das richtige


    # /.../
    # SaX generated XFree86 config file
    # Created on: 2004-08-09T14:44:30+0200.
    #
    # Version: 4.7
    # Contact: Marcus Schaefer <sax@suse.de>, 2002
    #
    # Automatically generated by [ISaX] (4.7)
    # PLEASE DO NOT EDIT THIS FILE!
    #

    Section "Files"
    FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/local"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/Type1"
    FontPath "/usr/X11R6/lib/X11/fonts/URW"
    FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
    FontPath "/usr/X11R6/lib/X11/fonts/PEX"
    FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
    FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1"
    FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/kwintv"
    FontPath "/usr/X11R6/lib/X11/fonts/truetype"
    FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/CID"
    FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1"
    FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/xtest"
    InputDevices "/dev/ttyS0"
    InputDevices "/dev/ttyS1"
    InputDevices "/dev/ttyS2"
    InputDevices "/dev/ttyS3"
    InputDevices "/dev/ttyS4"
    InputDevices "/dev/ttyS5"
    InputDevices "/dev/ttyS6"
    InputDevices "/dev/ttyS7"
    InputDevices "/dev/ttyS8"
    InputDevices "/dev/psaux"
    InputDevices "/dev/logibm"
    InputDevices "/dev/sunmouse"
    InputDevices "/dev/atibm"
    InputDevices "/dev/amigamouse"
    InputDevices "/dev/atarimouse"
    InputDevices "/dev/inportbm"
    InputDevices "/dev/gpmdata"
    InputDevices "/dev/mouse"
    InputDevices "/dev/usbmouse"
    InputDevices "/dev/adbmouse"
    InputDevices "/dev/input/mice"
    InputDevices "/dev/input/event0"
    InputDevices "/dev/pointer0"
    InputDevices "/dev/pointer1"
    InputDevices "/dev/pointer2"
    InputDevices "/dev/pointer3"
    EndSection

    Section "ServerFlags"
    Option "AllowMouseOpenFail"
    Option "RandR" "on"
    EndSection

    Section "Module"
    Load "speedo"
    Load "v4l"
    Load "extmod"
    Load "type1"
    Load "glx"
    Load "freetype"
    Load "dbe"
    EndSection

    Section "InputDevice"
    Driver "keyboard"
    Identifier "Keyboard[0]"
    Option "Protocol" "Standard"
    Option "XkbLayout" "de"
    Option "XkbModel" "pc105"
    Option "XkbRules" "xfree86"
    Option "XkbVariant" "nodeadkeys"
    EndSection


    Section "InputDevice"
    Driver "mouse"
    Identifier "Mouse[1]"
    Option "ButtonNumber" "5"
    Option "Buttons" "5"
    Option "Device" "/dev/mouse"
    Option "Name" "Autodetection"
    Option "Protocol" "imps/2"
    Option "Vendor" "Sysp"
    Option "ZAxisMapping" "4 5"
    EndSection


    Section "Monitor"
    Option "CalcAlgorithm" "CheckDesktopGeometry"
    HorizSync 30-70
    Identifier "Monitor[0]"
    ModelName "1024X768@70HZ"
    VendorName "--> VESA"
    VertRefresh 50-150
    UseModes "Modes[0]"
    EndSection


    Section "Modes"
    Identifier "Modes[0]"
    Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -HSync -VSync
    EndSection


    Section "Screen"
    DefaultDepth 24
    SubSection "Display"
    Depth 16
    Modes "1024x768"
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1024x768"
    EndSubSection
    Device "Device[0]"
    Identifier "Screen[0]"
    Monitor "Monitor[0]"
    EndSection


    Section "Device"
    BoardName "GeForce4 MX 440"
    Driver "nvidia"
    Identifier "Device[0]"
    Screen 0
    Option "Rotate" "off"
    VendorName "NVidia"
    EndSection


    Section "ServerLayout"
    Identifier "Layout[all]"
    InputDevice "Keyboard[0]" "CoreKeyboard"
    InputDevice "Mouse[1]" "CorePointer"
    Option "Clone" "off"
    Option "Xinerama" "off"
    Screen "Screen[0]"
    EndSection

    Section "DRI"
    Group "video"
    Mode 0660
    EndSection


    so ich hoffe das hilft dir weiter :!:

    danke,alex

  • hm.... 70Hz find ich n bißchen mager, aber vielleicht bin ich da auch zu empfindlich :?:

    it won't give up it wants me dead and goddamn this noise inside my head

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!