Seit ungefähr 2 Wochen stürtzt mein PC nach einer gewissen Zeit immer ab. Ich bin der Meinung, dass es was mit der Datei svchost.exe zu tun hat, die sich nach einige Zeit immer mehr Speicherplatz aneignet, bis der PC abstürzt. Die Datei gehört zu Windows und regelt Dienste für DLL. Was kann ich dagegen machen???
Windows XP Absturz und svchost.exe
-
-
- Gerade eben
- Anzeige
Hallo!
Wenn du gerade an deiner Website arbeitest oder dein aktuelles Hosting überdenkst: Wir betreiben mit NetzLiving eine Hosting-Plattform, die speziell auf Performance, Sicherheit und einfache Verwaltung ausgelegt ist.
- ✔️ Schnelle Ladezeiten (optimiert für WordPress, WoltLab & Co.)
- ✔️ Deutsche Server & DSGVO-konform
- ✔️ Persönlicher Support (kein 0815-Ticket-System)
-
Wichtig!!!!
Zitat
.... mit einem aussagekräftigen
Betreff und einer möglichst genauen Fehlerbeschreibung.
Was hast du für ein BS?Was ich dazu gefunden habe:
Zitat
BESSERUNG FÜR DAS SVCHOST PROBLEM!!Für alle die ihre CPU auch mal wieder für dich nutzen wollen und nicht nur svchost überlassen, sollten sich dieses: http://www.wintotal.de/yad/softw.php?action=eintrag&id=533 nette Tool runterladen. Dort sieht man dann den svchost aufgeführt als Porzess und in seine Einzelteile zerlegt. Mit diesem Tool, kann man jedoch die Priorität des Prozesses auf ein Minimum setzten was mit dem Task nicht möglich ist und der Pc somit um einiges schneller ist.
Noch eine Lösung halt auf Englisch:
ZitatAlles anzeigen
Halllo zusammenZuerst mal sorry das ich nicht in die die dafür vorgesehenen Boards schriebe aber irgendwie klappte das nicht.
Also zum Punkt mit diesem Problem wegen der CPU Auslastung von nahezu
100%. Es gibt hier eine Lösung von Microsoft selbst und zwar hängt es
wie vermutet mit den USB Devices resp. Geräten zusammen, in meinem Fall wäre dies eine Webcam.Microsoft Knowledge Base Article - 303777
After You Install a Visioneer USB Scanner the CPU Usage May Be Unusually High
The information in this article applies to:
Microsoft Windows XP Home Edition
Microsoft Windows XP ProfessionalThis article was previously published under Q303777
IMPORTANT: This article contains information about modifying the registry. Before you modify the registry, make sure to back it up and make sure that you understand how to restore the registry if a problem occurs. For information about how to back up, restore, and edit the registry, click the following article number to view the article in the Microsoft Knowledge Base:
256986 Description of the Microsoft Windows RegistrySYMPTOMS
When you use a Visioneer universal *hier nicht* bus (USB) scanner, your computer may experience a sudden, unusually high amount of CPU usage. After the scanner is installed, Task Manager may report that the service host program (Svchost.exe) utilizes 10 to 30 percent of the CPU. However, when you disable the scanner by using Device Manager, the unusually high amount of CPU utilization is stopped (and lowered).
CAUSE
This problem can occur because the device drivers that are used with these scanners "poll" a device to receive device notifications, such as, button pushes. USB provides a separate pipe that the device driver can use to support device events, but the firmware of the scanner does not use this feature, and therefore causes the devices to be polled.
RESOLUTION
WARNING: If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.To resolve this problem, either disable polling for the scanner or increase its poll timeout value:
Locate the scanner in the following registry:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Class\{6BDD1FC6-810F-11D0-BEC7-08002BE2092F}NOTE: Under the preceding registry key, you may locate multiple subkeys, the actual number of which depends upon how many imaging devices that you have installed. The scanner can be identified by the device name in one of the strings. You may have more than one subkey for your scanner if you plugged the device into different USB ports and the manufacturer did not use *hier nicht* numbers for the device. In this situation, you can often observe a "#2" after the device name that corresponds to the correct version as listed in Control Panel.
When you have located the device key for your scanner, open the following DeviceData subkey:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Class\{6BDD1FC6-810F-11D0-BEC7- 08002BE2092F}\0000\DeviceDataNOTE: There can be multiple values in this key, such as, Server and TwainDS.
To change the polling time interval, create a new DWORD value under DeviceDate called PollTimeout, and then set its value to have a polling interval in milliseconds. A value of 1000 can poll every second. The default value is set at 700.
To disable the button functionality and the polling capability, create a new DWORD value called DisableNotifications, and then set the value to 1.
STATUS
Microsoft has confirmed that this is a problem in the Microsoft products that are listed at the beginning of this article.
Last Reviewed: 6/11/2002
Keywords: kbenv kbprb KB303777Noch ein Tipp:
Verwende mal die Forensuche und gib svchost ein. -
mein betriebssystem sollte eigentlich aus dem titel hervorgehen! es geht um windows xp home edition!
-
Entschuldigung. Ich hab da gleichzeitig in einem anderen Post geschrieben und da war kein BS angegeben. Tut mit Leid.Wir Ösis müssen doch zusammenhalten!

-
Über dieses Thema wurde auch bei Nickles endlos geschrieben.Anbei ein Anhang.
"Anscheinend hast du den Blaster-Wurm in der neuen Variante. Es gibt nun ca. 3 Versionen (die mir bisher bekannt sind). Um den Wurm zu entfernen, würde ich vorschlagen du besuchst dieses Posting:
http://www.nickles.de/thread_cache/537479473.html "mfg Flaty
-
nein, habe sämtlich symantec anti-wurm programme drüberlaufen lassen, es hat nichts mit dem blaster wurm oder einem anderen derzeit bekannten zu tun!
-
Bei mir wurde der Wurm mit den Suchprogrammen auch nicht gefunden.Schau mal in "System 32 "dort mußte ich ihn manuell löschen und in Registry "Run".
mfg Flaty
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!