Maus geht unter SuSE Linux 9.0 Pro nicht

  • Ich habe SuSE Linux 9.0 auf meinen Server installiert und habe (SEIT MITTLERWEILE CA. 10 TAGEN) jetzt folgendes Problem: Während der Installation und beim ersten Systemstart funktioniert die Maus einwandfrei. Aber sobald ich nachher mal neu starte rührt sie sich nicht mehr! An was könnte das liegen???

    Ich habe schon mehrmals neu installiert -> immer der genau gleiche Fehler! Habe SuSE Linux 9.0 auch auf meinem normalen PC installiert -> KEIN Problem, obwohl ich beide Computer mit der selben Maus installiert habe! Aber ein Hardware Fehler kann es eigentlich nicht sein, da ich auf einer 2. Festplatte Windows drauf hab und da geht die Maus auch!

    Es ist eine Standard PS/2 Maus. Ich habe gehört, dass es mit "gpm" (General Purpose Mouse) zusammenhängen könnte.

    "gpm ist der Console-Mouse-Dämon und wenn der rennt, dann könne es sein, dass das Mouse-Device nicht mehrmals geöffnet werden kann."

    Das alles sagt mir eigentlich nichts und ich habe wahrscheinlich auch deshalb nichts im Netz gefunden was mir weiterhelfen würde. ;-))

    • Anzeige

    Hallo!

    Wenn du gerade an deiner Website arbeitest oder dein aktuelles Hosting überdenkst: Wir betreiben mit NetzLiving eine Hosting-Plattform, die speziell auf Performance, Sicherheit und einfache Verwaltung ausgelegt ist.

    • ✔️ Schnelle Ladezeiten (optimiert für WordPress, WoltLab & Co.)
    • ✔️ Deutsche Server & DSGVO-konform
    • ✔️ Persönlicher Support (kein 0815-Ticket-System)

    Mehr erfahren

  • Eventuell könntest du das Problem per Yast in Griff bekommen:

    Yast2 - Hardware - Mausmodell wählen

    PS: ich denk mal, das wird gleich sein wie bei Suse 8.2 :D

    MfG Karo

  • Mit YAST läßt sich das Problem nicht beheben...

    Ich weiß zwar nicht genau was so ein KVM-Switch ist, aber ich habe die Maus direkt am Computer angeschloßen...

  • hi,
    gpm ist dafür da um die maus an einer konsole benutzen zu können.
    davon ab dass ich das für unnötig halte, zerschiesst es einem gerne die mausunterstützung in X.
    einfach gpm mit yast deinstallieren, oder in /etc/init.d/gpm löschen . ( da lag das startscipt jedenlfalls in suse7.2 rum)

    stevie

  • Vielleicht hilft meine /etc/X11/XF86Config weiter:

    Ich habe übrigens das Packet "gpm" deinstalliert!

    --------------------------------------------------------------

    # /.../
    # SaX generated XFree86 config file
    # Created on: 2003-11-09T21:03:04+0100.
    #
    # Version: 4.7
    # Contact: Marcus Schaefer <sax@suse.de>, 2002
    #
    # Automatically generated by [ISaX] (4.7)
    # PLEASE DO NOT EDIT THIS FILE!
    #

    Section "Files"
    FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/local"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/Type1"
    FontPath "/usr/X11R6/lib/X11/fonts/URW"
    FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
    FontPath "/usr/X11R6/lib/X11/fonts/PEX"
    FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
    FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1"
    FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/kwintv"
    FontPath "/usr/X11R6/lib/X11/fonts/truetype"
    FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/CID"
    FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1"
    FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/xtest"
    InputDevices "/dev/ttyS0"
    InputDevices "/dev/ttyS1"
    InputDevices "/dev/ttyS2"
    InputDevices "/dev/ttyS3"
    InputDevices "/dev/ttyS4"
    InputDevices "/dev/ttyS5"
    InputDevices "/dev/ttyS6"
    InputDevices "/dev/ttyS7"
    InputDevices "/dev/ttyS8"
    InputDevices "/dev/psaux"
    InputDevices "/dev/logibm"
    InputDevices "/dev/sunmouse"
    InputDevices "/dev/atibm"
    InputDevices "/dev/amigamouse"
    InputDevices "/dev/atarimouse"
    InputDevices "/dev/inportbm"
    InputDevices "/dev/gpmdata"
    InputDevices "/dev/mouse"
    InputDevices "/dev/usbmouse"
    InputDevices "/dev/adbmouse"
    InputDevices "/dev/input/mice"
    InputDevices "/dev/input/event0"
    InputDevices "/dev/pointer0"
    InputDevices "/dev/pointer1"
    InputDevices "/dev/pointer2"
    InputDevices "/dev/pointer3"
    EndSection

    Section "ServerFlags"
    Option "AllowMouseOpenFail"
    EndSection

    Section "Module"
    Load "freetype"
    Load "speedo"
    Load "type1"
    Load "dbe"
    Load "glx"
    Load "v4l"
    Load "extmod"
    EndSection

    Section "InputDevice"
    Driver "Keyboard"
    Identifier "Keyboard[0]"
    Option "Protocol" "Standard"
    Option "XkbLayout" "de"
    Option "XkbModel" "pc105"
    Option "XkbRules" "xfree86"
    Option "XkbVariant" "nodeadkeys"
    EndSection


    Section "InputDevice"
    Driver "mouse"
    Identifier "Mouse[1]"
    Option "ButtonNumber" "5"
    Option "Device" "/dev/mouse"
    Option "Name" "Autodetection"
    Option "Protocol" "imps/2"
    Option "Vendor" "Sysp"
    Option "ZAxisMapping" "4 5"
    EndSection


    Section "Monitor"
    HorizSync 31-48
    Identifier "Monitor[0]"
    ModelName "1024X768@60HZ"
    Option "DPMS"
    VendorName "--> VESA"
    VertRefresh 50-60
    UseModes "Modes[0]"
    EndSection


    Section "Modes"
    Identifier "Modes[0]"
    Modeline "1024x768" 62.35 1024 1056 1184 1312 768 772 776 792 -HSync -VSync
    EndSection


    Section "Screen"
    DefaultDepth 16
    SubSection "Display"
    Depth 15
    Modes "1024x768"
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1024x768"
    EndSubSection
    SubSection "Display"
    Depth 32
    Modes "1024x768"
    EndSubSection
    SubSection "Display"
    Depth 8
    Modes "1024x768"
    EndSubSection
    Device "Device[0]"
    Identifier "Screen[0]"
    Monitor "Monitor[0]"
    EndSection


    Section "Device"
    BoardName "Rage 128 PF"
    BusID "1:0:0"
    Driver "r128"
    Identifier "Device[0]"
    Screen 0
    VendorName "ATI"
    EndSection


    Section "ServerLayout"
    Identifier "Layout[all]"
    InputDevice "Keyboard[0]" "CoreKeyboard"
    InputDevice "Mouse[1]" "CorePointer"
    Option "Clone" "off"
    Option "Xinerama" "off"
    Screen "Screen[0]"
    EndSection

    Section "DRI"
    Group "video"
    Mode 0660
    EndSection

  • Ich glaube es liegt ein Hardwarekonflikt vor! Wie kann ich die IRQ Belegung unter SuSE Linux 9.0 ändern?

  • kann man bei sax oder yast nicht entsprechende optionen mitgeben ?
    wieso glaubst du, dass der irq das problem ist ?
    an der konsole gibts setserial. damit kenn ich mich aber nicht aus, hab ich noch nie benötigt.

    stevie

  • Bei mir ist auf IRQ 12 (standardmäßig für Maus reserviert) die eth1. Ich komme auch nicht ins Internet (eth1), das würde zusammenpassen...

  • kannst du die nic mal in nen anderen slot stecken ?
    wenns wirklich am irq liegt würd ich da mal nen bisschen probieren.
    was soll das ding überhaupt "serven" ?
    auf lange sicht halte ichs für besser, nen server ohne X laufen zu lassen. dann brauchst du auch keine maus :)

    stevie

  • es war ein Hardwarekonflikt auf IRQ 12 mit der eth1 (war eine ISA, hab sie jetzt durch eine PCI ersetzt)!

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!