kann auf einem Schuttle Ak35GT2 kein Bios Update machen.
Altes Bios:
AK35S20C
neues Bios
AK35S20I
Ist eine exe Datei.
Bekomme beim starten des Progi im MS Dos folgende Fehlermeldung:
Err create1
Jumper sind richtig.
:kotz:
Kann mir da jemand helfen?
Bios Update
-
-
- Gerade eben
- Anzeige
Hallo!
Wenn du gerade an deiner Website arbeitest oder dein aktuelles Hosting überdenkst: Wir betreiben mit NetzLiving eine Hosting-Plattform, die speziell auf Performance, Sicherheit und einfache Verwaltung ausgelegt ist.
- ✔️ Schnelle Ladezeiten (optimiert für WordPress, WoltLab & Co.)
- ✔️ Deutsche Server & DSGVO-konform
- ✔️ Persönlicher Support (kein 0815-Ticket-System)
-
http://www.shuttle.com/hq/support/download/download2.asp
ZitatShuttle motherboards can be flashed using the following two methods, but before you begin, note which BIOS your motherboard uses. I.e AMI or AWARD/Phoenix BIOS? AMI BIOS are clearly marked above.
(1) AWARD/Phoenix BIOS: Refer to ftp://ftp.shuttle.com/BIOS/utility, for usage instructions.
(2) AMI BIOS: Refer to ftp://ftp.shuttle.com/BIOS/utility, for usage instructions.To flash a BIOS under DOS, download the BIOS file from the Download pages or ftp://ftp.shuttle.com/ in zip format (the zip file will contain for example; fb51s034.bin and awdflash.exe). Extract the file onto a bootable floppy disk or onto the hard drive. Restart the system with a bootable floppy disk or bootable CD into PURE DOS mode. At the DOS prompt, type awdflash fb51s034.bin. When the update is complete, restart and enter CMOS Setup Utility (hold down delete at start up). Select &8220;Load Optimized Defaults&8221;, then &8220;Save & Exit Setup&8221;.
Die .bin
http://ftp.shuttle.com/BIOS/ak35/v2.x/ak35s20i.binDu musst den oberen Link nehmen und Ak35GT2 bei Step 2 eintragen, die Links zu den Flash Tools gehen sonst nicht.
-
Brauchst du das Update wirklich?
Never change a running system!
Grüße; ähM_Key
-
Danke hat wunderbar geklappt.ähM_Key
Das System hatte zwischendurch sogar im Bios hänger. -
Na wenn's kein "running" System war, ist das natürlich erlaubt

Grüße; ähM_Key
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!