Hey Leute ich brauche dringend hilfe bekomme andauernd Bluescreens ....
es steht irgendwas mit IRQ kp xD kommen auch immer verschiedene manchmal auch etwas mit win32k.sys weiß echt nicht mehr was ich machen soll
hatte auch 4gb arbeitsspeicher jetzt zeigt er nur noch 2 an habe 2gb rausgenommen aber mir fällt auf das beide nicht kaputt sind da auf einem steckplatz beide gehen kann mir bitte jemand helfen ?
Win7 Bluescreen HILFE
-
-
- Gerade eben
- Anzeige
Hallo!
Wenn du gerade an deiner Website arbeitest oder dein aktuelles Hosting überdenkst: Wir betreiben mit NetzLiving eine Hosting-Plattform, die speziell auf Performance, Sicherheit und einfache Verwaltung ausgelegt ist.
- ✔️ Schnelle Ladezeiten (optimiert für WordPress, WoltLab & Co.)
- ✔️ Deutsche Server & DSGVO-konform
- ✔️ Persönlicher Support (kein 0815-Ticket-System)
-
Hallo,
geh auf Start, im Eingabefeld Arbeitsspeicher eingeben, im Ergebnisfenster "Arbeitsspeicher überprüfen" (oder so ähnlich) anklicken.
Der PC startet neu und führt dann eine Überprüfung des Arbeitsspeichers durch, das mit allen Modulen durchführen, am besten einzeln, damit ein defektes Modul schneller identifiziert wird. -
Hallo Michi,
das funktioniert nicht!
Entweder so: "Start > Eingabefeld> 'Verwaltung' > Windows-Speicherdiagnose"
Oder einfacher so: "Start > Systemsteuerung > Verwaltung > ...." -
Hey bei der Speicherdiagnose kamen keine Fehler raus. Hab den schon mehrmals durchlaufen lassen. Inzwischen kommen auch wieder andere Bluescreens habe jetzt welche mit usbport.sys
und Driver_IRQL_NOT_LESS_EQUAL iwie sowas... -
Hallo Timon,
melde dich bitte immer an, bevor du antwortest. Sonst musst du immer erst frei geschaltet werden.
Schau mal im Gerätemanager nach, ob da alles i.O. ist. Es könnte auch ein Treiberproblem sein. -
Sorry hatte nicht gemerkt das ich nicht angemeldet bin habe im Gerätemanager jeden treiber manuel versucht zu Updaten ging bei keinem alle auf dem neusten Stand weiß echt nicht mehr was ich machen soll

Meißtens tritt das Problem nur auf wenn ich Spiele,Surfe oder Videos gucke. Ab und zu macht er auch mal so ein Bluescreen kurz nach dem Start. -
Hast du schon mal deine Platte kontrolliert? Lade dir mal CrystalDiskInfo Portable - Download - CHIP Online
Nur entpacken und starten. -
Danke werde ich ebend machen. Gerade ebend kam noch ein Bluescreen als ich am Surfen war mit der Fehlermeldung: PAGE_FAULT_IN_NONEPAGE_AREA
-
So habe das Programm mal gestartet und einen Screenshot gemacht.
qweqwe.png - Bilder und Fotos kostenlos auf ImageBanana hochladen -
Womit "spielst" du? Hast du dabei eine Hardware angeschlossen?
Darauf deutet das hier hin: usbport.sysIch zitiere mal:
ZitatAlles anzeigenPAGE_FAULT_IN_NONPAGED_AREA bzw. 0x00000050
Diese Stoppnachricht wird angezeigt, wenn angeforderte Daten im Speicher nicht gefunden werden. Dieser Fehler wir erzeugt, da das System in der Auslagerungsdatei nach Daten sucht. Das System stellt jedoch fest, dass sich die fehlenden Daten in einem Speicherbereich der Festplatte befinden, der nicht gelesen werden kann. Das System stellt fest, dass es die Daten nicht finden kann und das eine Wiederherstellung nicht möglich ist. Dieser Fehler kann durch eine fehlerhafte Hardware (z.B. Hauptspeicher), einen fehlenden Systemdienst, Antivirenprogramme oder einen beschädigten NTFS-Datenträger erzeugt werden.Die in der Stoppnachricht aufgelisteten Parameter sind wie folgt definiert:
* Virtuelle Adresse die den Fehler verursacht hat
* Zugriffsart (0 = Lesevorgang; 1 = Schreibvorgang)
* Wenn ungleich Null, die Befehlsadresse, die auf die Adresse in Parameter 1 verwiesen hat
* Unklare Information über die Stoppnachricht (interpretiert vom Kernel)Lösen des Problems:
Fehlerhafte Hardwarekomponente. Die Stoppnachricht tritt gewöhnlich nach der Installation einer fehlerhaften Hardware oder beim Ausfall einer bereits installierten Hardware auf (meist Hauptspeicher, L2-RAM-Cache oder Video-RAM). Wenn Sie das System vor kurzem durch eine neue Hardware ergänzt haben, entfernen Sie diese wieder, und beobachten Sie ob der Fehler erneut auftritt. Wenn eine bereits installierte Hardware ausgefallen ist, entfernen Sie diese oder tauschen Sie sie aus.
Fehlerhafter Systemdienst. Der Fehler tritt gewöhnlich nach der installation eines fehlerhaften Systemdienstes auf. Deaktivieren Sie den Dienst und beobachten Sie, ob der Fehler erneut auftritt. Sollte dies der Fall sein, erkundigen Sie sich beim Hersteller, ob ein Update für den Systemdienst erhältlich ist. Wenn der Fehler beim Start des Computers auftritt, starten Sie den Computer neu und warten Sie bis der Bildschirm mit der Aufforderung Problembehandlung und erweiterte Windows-Startoptionen: F8-TASTE drücken erscheint. Drücken Sie dann F8 und wählen dann im Menü Erweiterte Windows-Startoptionen die Option Letzte als funktionierend bekannte Konfiguration aus. Dies ist meist wirkungsvoll, wenn Dienste einzeln und nacheinander installiert werden.
Antivirenprogramm.Deaktivieren Sie das Programm und beobachten Sie, ob der Fehler erneut auftritt. Sollte dies der Fall sein, erkundigen Sie sich beim Hersteller, ob ein Update erhältlich ist.
Beschädigter NTFS-Datenträger. Starten Sie Chkdsk /f /r, um stukturelle Be-schädigungen des Dateisystems zu erkennen und zu beheben. Booten Sie das System neu, damit die Überprüfung bei einer Systempartition beginnen kann. Wenn sich das System Aufgrund des Fehlers nicht neu starten lässt, führen Sie über die Wiederherstellungskonsole Chkdsk /r aus. Wenn es sich um eine SCSI-Festplatte handelt, überprüfen Sie, ob die Datenübertragung zwischen SCSI-Controller und Festplatte einwandfrei funktioniert.
WARNUNG
Wenn die Systempartition mit FAT16 formatiert wurde und eine Datenträger-bereinigung mit einem MS-DOS-basierten Festplattentool durchgeführt wird, kann es zu Beschädigungen der von Windows verwendeten langen Datei-namen kommen. Daher sollten Sie Windows-Festplatten nur mit der dazu passenden Chkdisk-Version überprüfen.
Die Ereignisanzeige (Systemprotokoll) gibt eventuell zusätzliche Hinweise auf das verursachende Gerät oder Dienst.
-
Zitat von guepewi;996217
Hallo Michi,
das funktioniert nicht!
> ...."
Habe das vor kurzem aber so gemacht. -
- Von hier WhoCrashed herunterladen un installieren: http://www.resplendence.com/download...ashedSetup.exe
- Whocrashed starten.
- Ganz oben links auf analyse klicken.
- Das, was dann im Fenster steht, kopieren und den Text hier einfügen.
-
Zitat von Michi;996288
Habe das vor kurzem aber so gemacht.
Welches System?
-
Windows 7, so wie es hier wohl auch der Fall ist.
-
Seltsam, bei mir nicht!
Aber sei es darum, viele Wege.....:D -
Hey Danke für eure vielen Antworten hatte leider 2 Tage kein Internet. Ich Spiele mit einer Ati Readon 1700fx und meine Festplatte ist eigl. noch ziehmlich neu. Was mir wieder aufgefallen ist ich habe 4 Steckplätze für RAM Speicher 2 für meine die ich benutze und 2 andere das Problem ist ich kann nur einen von meinen benutzen bei einem zeigt er einfach nichts mehr an. aber in dem einen Slot gehen beide wenn ich sie einzelnd teste. Hier der Report:
System Information (local)
--------------------------------------------------------------------------------computer name: TIMON2-PC
windows version: Windows 7 , 6.1, build: 7600
windows dir: C:\Windows
CPU: AuthenticAMD AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ AMD586, level: 15
2 logical processors, active mask: 3
RAM: 2146754560 total
VM: 2147352576, free: 1997414400--------------------------------------------------------------------------------
Crash Dump Analysis
--------------------------------------------------------------------------------Crash dump directory: C:\Windows\Minidump
Crash dumps are enabled on your computer.
On Sun 20.10.2013 11:18:35 GMT your computer crashed
crash dump file: C:\Windows\Minidump\102013-16546-01.dmp
This was probably caused by the following module: atikmdag.sys (atikmdag+0xDBDE8)
Bugcheck code: 0x50 (0xFFFFFFFFFFFFFE43, 0x1, 0xFFFFFFFF91FEF761, 0x0)
Error: PAGE_FAULT_IN_NONPAGED_AREA
file path: C:\Windows\system32\drivers\atikmdag.sys
product: ATI Radeon-Familie
company: ATI Technologies Inc.
description: ATI Radeon-Kernelmodustreiber
Bug check description: This indicates that invalid system memory has been referenced.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: atikmdag.sys (ATI Radeon-Kernelmodustreiber, ATI Technologies Inc.).
Google query: ATI Technologies Inc. PAGE_FAULT_IN_NONPAGED_AREAOn Sun 20.10.2013 11:18:35 GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: atikmdag.sys (atikmdag+0xDBDE8)
Bugcheck code: 0x50 (0xFFFFFFFFFFFFFE43, 0x1, 0xFFFFFFFF91FEF761, 0x0)
Error: PAGE_FAULT_IN_NONPAGED_AREA
file path: C:\Windows\system32\drivers\atikmdag.sys
product: ATI Radeon-Familie
company: ATI Technologies Inc.
description: ATI Radeon-Kernelmodustreiber
Bug check description: This indicates that invalid system memory has been referenced.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: atikmdag.sys (ATI Radeon-Kernelmodustreiber, ATI Technologies Inc.).
Google query: ATI Technologies Inc. PAGE_FAULT_IN_NONPAGED_AREAOn Sun 20.10.2013 11:09:44 GMT your computer crashed
crash dump file: C:\Windows\Minidump\102013-15234-01.dmp
This was probably caused by the following module: ntkrnlpa.exe (nt+0x3D21C)
Bugcheck code: 0x1000008E (0xFFFFFFFFC0000005, 0xFFFFFFFF8285521C, 0xFFFFFFFF9B83BA34, 0x0)
Error: KERNEL_MODE_EXCEPTION_NOT_HANDLED_M
file path: C:\Windows\system32\ntkrnlpa.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.On Sat 19.10.2013 22:43:09 GMT your computer crashed
crash dump file: C:\Windows\Minidump\102013-14765-01.dmp
This was probably caused by the following module: ntfs.sys (Ntfs+0x14355)
Bugcheck code: 0x24 (0x1904FB, 0xFFFFFFFF9B89F7DC, 0xFFFFFFFF9B89F3C0, 0xFFFFFFFF887A7885)
Error: NTFS_FILE_SYSTEM
file path: C:\Windows\system32\drivers\ntfs.sys
product: Betriebssystem Microsoft® Windows®
company: Microsoft Corporation
description: NT-Dateisystemtreiber
Bug check description: This indicates a problem occurred in the NTFS file system.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.On Sat 19.10.2013 21:41:22 GMT your computer crashed
crash dump file: C:\Windows\Minidump\101913-14359-01.dmp
This was probably caused by the following module: amdk8.sys (amdk8+0x1BB6)
Bugcheck code: 0xD1 (0xFFFFFFFFFFFFFFFF, 0xFF, 0x8, 0xFFFFFFFFFFFFFFFF)
Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\drivers\amdk8.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Processor Device Driver
Bug check description: This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.On Sat 19.10.2013 00:33:10 GMT your computer crashed
crash dump file: C:\Windows\Minidump\101913-14875-01.dmp
This was probably caused by the following module: ntkrnlpa.exe (nt+0x45ABB)
Bugcheck code: 0xA (0x4, 0x2, 0x1, 0xFFFFFFFF828A5B86)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\ntkrnlpa.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.On Fri 18.10.2013 14:11:25 GMT your computer crashed
crash dump file: C:\Windows\Minidump\101813-14968-01.dmp
This was probably caused by the following module: hal.sys (hal+0xBACE)
Bugcheck code: 0xA (0xFFFFFFFFFFFFFF7C, 0x2, 0x1, 0xFFFFFFFF82C1CACE)
Error: IRQL_NOT_LESS_OR_EQUAL
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: hal.sys .
Google query: hal.sys IRQL_NOT_LESS_OR_EQUALOn Fri 18.10.2013 13:50:57 GMT your computer crashed
crash dump file: C:\Windows\Minidump\101813-15171-01.dmp
This was probably caused by the following module: hal.sys (hal+0xBACE)
Bugcheck code: 0x1000007F (0x8, 0xFFFFFFFF801DB000, 0x0, 0x0)
Error: UNEXPECTED_KERNEL_MODE_TRAP_M
Bug check description: This indicates that a trap was generated by the Intel CPU and the kernel failed to catch this trap.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem might be caused by a thermal issue.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: hal.sys .
Google query: hal.sys UNEXPECTED_KERNEL_MODE_TRAP_MOn Fri 18.10.2013 12:39:17 GMT your computer crashed
crash dump file: C:\Windows\Minidump\101813-18296-01.dmp
This was probably caused by the following module: ntkrnlpa.exe (nt+0x45ABB)
Bugcheck code: 0xA (0x282828FB, 0x2, 0x0, 0xFFFFFFFF82885B3F)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\ntkrnlpa.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.On Fri 18.10.2013 10:48:41 GMT your computer crashed
crash dump file: C:\Windows\Minidump\101813-13343-01.dmp
This was probably caused by the following module: ntkrnlpa.exe (nt+0x45ABB)
Bugcheck code: 0xA (0x2FD8, 0x2, 0x1, 0xFFFFFFFF81CABDA5)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\ntkrnlpa.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.On Fri 18.10.2013 10:14:04 GMT your computer crashed
crash dump file: C:\Windows\Minidump\101813-12859-01.dmp
This was probably caused by the following module: ntkrnlpa.exe (nt+0x84AA3)
Bugcheck code: 0x50 (0xFFFFFFFFD654194B, 0x0, 0xFFFFFFFF81CAFFC1, 0x2)
Error: PAGE_FAULT_IN_NONPAGED_AREA
file path: C:\Windows\system32\ntkrnlpa.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that invalid system memory has been referenced.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.On Fri 18.10.2013 01:14:58 GMT your computer crashed
crash dump file: C:\Windows\Minidump\101813-18031-01.dmp
This was probably caused by the following module: ntkrnlpa.exe (nt+0x4353B)
Bugcheck code: 0x7F (0x0, 0x0, 0x0, 0x0)
Error: UNEXPECTED_KERNEL_MODE_TRAP
file path: C:\Windows\system32\ntkrnlpa.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This bug check indicates that the Intel CPU generated a trap and the kernel failed to catch this trap.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.On Thu 17.10.2013 23:43:03 GMT your computer crashed
crash dump file: C:\Windows\Minidump\101813-16312-01.dmp
This was probably caused by the following module: amdk8.sys (amdk8+0x1BB6)
Bugcheck code: 0xA (0x2974B44, 0x1F, 0x0, 0xFFFFFFFF828E9290)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\drivers\amdk8.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Processor Device Driver
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.On Thu 17.10.2013 23:21:17 GMT your computer crashed
crash dump file: C:\Windows\Minidump\101813-13968-01.dmp
This was probably caused by the following module: amdk8.sys (amdk8+0x1BB6)
Bugcheck code: 0x7F (0xD, 0x0, 0x0, 0x0)
Error: UNEXPECTED_KERNEL_MODE_TRAP
file path: C:\Windows\system32\drivers\amdk8.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Processor Device Driver
Bug check description: This bug check indicates that the Intel CPU generated a trap and the kernel failed to catch this trap.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.On Thu 17.10.2013 22:55:45 GMT your computer crashed
crash dump file: C:\Windows\Minidump\101813-15250-01.dmp
This was probably caused by the following module: hal.sys (hal+0xBACE)
Bugcheck code: 0xA (0xFFFFFFFF807EFF7C, 0x2, 0x1, 0xFFFFFFFF8281DACE)
Error: IRQL_NOT_LESS_OR_EQUAL
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: hal.sys .
Google query: hal.sys IRQL_NOT_LESS_OR_EQUAL--------------------------------------------------------------------------------
Conclusion
--------------------------------------------------------------------------------32 crash dumps have been found and analyzed. Only 15 are included in this report. 2 third party drivers have been identified to be causing system crashes on your computer. It is strongly suggested that you check for updates for these drivers on their company websites. Click on the links below to search with Google for updates for these drivers:
atikmdag.sys (ATI Radeon-Kernelmodustreiber, ATI Technologies Inc.)
hal.sysIf no updates for these drivers are available, try searching with Google on the names of these drivers in combination the errors that have been reported for these drivers and include the brand and model name of your computer as well in the query. This often yields interesting results from discussions from users who have been experiencing similar problems.
Read the topic general suggestions for troubleshooting system crashes for more information.
Note that it's not always possible to state with certainty whether a reported driver is actually responsible for crashing your system or that the root cause is in another module. Nonetheless it's suggested you look for updates for the products that these drivers belong to and regularly visit Windows update or enable automatic updates for Windows. In case a piece of malfunctioning hardware is causing trouble, a search with Google on the bug check errors together with the model name and brand of your computer may help you investigate this further.
-
Deinstalliere den ATI Treiber über Systemsteuerung/Programme und Funktionen. Anschließend installiere den Treiber neu.
-
Hier steht keiner bei und wo bekomme ich den richtigen her danke für deine hilfe
sdsds.png - Bilder und Fotos kostenlos auf ImageBanana hochladen -
-
Komme jetzt erst wieder dazu, mir das anzusehen - sorry. Das tun:
- Startemenü->
- Im Suchfeld Speicherdiagnosetool eingeben und angezeigtes Programm starten.
- Im angezeigten Dialog auf Jetzt starten und nach Problemen suchen klicken.
[Blockierte Grafik: http://s3.postimage.org/2uir7ocp0/mem.jpg]- Danach startet der Rechner neu und bootet im Speichertestmodus. Hier F1 Taste drücken “Erweitert” auswählen.
- Dann mit Taste F10 bestätigen.
- Speichertest bis zu Ende durchlaufen lassen.
- Nach dem Reboot zeigt der Rechner an, ob Fehler gefunden wurden.
Fehlerprotokolle des Tests können so abgerufen werden:- Startmenü
- In das Suchfeld Ereignisanzeige eingeben und angezeigtes Programm starten.
- Dort doppelt auf Anwendung und Dienstprotokolle klicken.
- Doppelklick auf Microsoft (befindet sich darunter).
- Doppelklick auf Windows (befindet sich darunter).
- Doppelklick auf MemoryDiagnostics-Result (befindet sich darunter).
- Debug auswählen und das letzte LOG aufrufen - Inhalt hier posten.
Siehe auch hier: Windows 7: Arbeitsspeicher mit interner Speicherdiagnose testen -
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!