Hallo!! Suche den oben genannten Bioetr. Kann jemand helfen? Beim Hersteller Sackgasse und Treiberseite auch. Danke und Gruß lobi
Phoenix 6.00 PG Bios-Treiber
-
-
- Gerade eben
- Anzeige
Hallo!
Wenn du gerade an deiner Website arbeitest oder dein aktuelles Hosting überdenkst: Wir betreiben mit NetzLiving eine Hosting-Plattform, die speziell auf Performance, Sicherheit und einfache Verwaltung ausgelegt ist.
- ✔️ Schnelle Ladezeiten (optimiert für WordPress, WoltLab & Co.)
- ✔️ Deutsche Server & DSGVO-konform
- ✔️ Persönlicher Support (kein 0815-Ticket-System)
-
Hi
Das Phoenix BIOS ist ab Ver 6.0 im Zusammenschluss mit dem BiOS von
AWARD BIOS
Für Upgrade etc probiers mal unter http://www.esupport.com/region.cfm?refererid=29
mfg

-
Gibt´s deinen Treiber nicht beim Mainboard-Hersteller?
Normal ist das so
Welches Mainboard hast du? evtl. ein älteres -
Danke!! Mainboard :Via Techn. KM266-8235 Vielleicht hilft das weiter Gruß lobi
-
Fast

Das ist der Chipsatz, der lässt aber schonmal auf einen Athlon/Duron schliessen.
Wenn du den Mainboardnamen nicht finden kannst, benutze am besten das Tool Everest.
Oder gucke auf´s Mainboard in Nähe AGP/PCI Slot sollte der Name zu finden sein (muss aber nicht)
-
Habe mit" Sandra lite " was versucht:Hersteller:Quality Design QDI ,BIOS 09/27/2003/-KM 266-8235-6A6LVQ1-00, Chipsatz VIA KT266/A, KT333/A
-
Von wem es ist wissen wir schonmal QDI
http://www.qdigrp.comAber eine MB-Bezeichnung fehlt immernoch
Im mom finde ich unter den SocketA Boards nur Jahre alte Bios, genauer gesagt 2 Jahre älter wie deins.
http://www.qdigrp.com/qdisite/eng/su…ad2.htm#socketa -
Oha da gibt´s doch neuere habe ich mich getäuscht, also her mit der Bezeichnung

-
Auf der Seite war ich auch schon!! Habe aber nichts gefunden!Schade. Aber Danke! Vielleichts klapps ja noch! lobi
-
Versuche es mal mit Everest
http://www.lavalys.com/products/download.php?pid=1&lang=en
Die Zip-Version musst du nichtmal installieren, mal testen und wieder löschen vielleicht haben wir Glück. -
Habe eigendlich alles gefunden Mainboard:KuDoz 7G ist von 2003 habe den Rechner 2004 gekauft. Wie gehe ich weiter vor? Datei runterladen und dann?Auf alle Fälle ist da was für mei System zum runterladen
-
Ja eine Frage wäre noch wieso braucht´s du das Update eigentlich, das hätte ich vorhin schon fragen können.
Wenn müsstest du es downloaden und es mit DOS-Diskette updaten, wie es bei QDI-Boards funktioniert steht hier. (leider in Englisch)
http://www.qdigrp.com/qdisite/faq_en/showmessage.asp?id=19 -
Das Programm Sandra Lite meckert deshalb rum!Oder ist es besser es zu lassen?Kann man das auch auf CD?Mei Rechner bootet als erster von CD.
-
Achso dann lass es, das meckert immer wegen dem Bios meist zu unrecht.
Wenn alles stabil läuft mache es nicht und freue dich das du weisst welches Mainboard du hast (dann haben wir nicht umsonst geforscht
)Über CD geht es nicht oder nur über 1000 Umwege
-
Danke!! Eine letzte Frage?Muß die Zip datei erst geöffnet werden und dann auf Diskette? Habe es schon Runtergeladen und kann es Ja mal auf Diskette bringen! Danke lobi
-
So einfach ist es nicht, siehe den Link oben
Erstmal DOS-Startdiskette erstellen, Flashprogramm auf Diskette, BiosFile auch dazu und und (lass es lieber eine Gefahr besteht das was schief geht und MB unbrauchbar wird)ZitatAlles anzeigen1)Download the correct xxxxx.ZIP file and extract it. It may include a BIOS binary file xxxxx.BIN and a README file. Please read the README file carefully.
2)Download the AWDFLASH.EXE file from top of every Bios page.
3)Prepare a DOS 6.2x bootable disk (or windows 95/98 bootable disk) and dont include any AUTOEXEC.BAT and CONFIG.SYS file, then save the above files (AWDFLASH.EXE and xxxxx.BIN) to this diskette.
4)Enter BIOS setup and record any setting that you have changed before, then Load Setup Default to resume the default setting. Set "Boot Sequence" to "A, C, SCSI" in BIOS FEATURE SETUP, and disable the "System BIOS Cacheable" in CHIPSET FEATURE SETUP. You must record all BIOS settings especially PCI IRQ settings also serial & parallel port settings etc.. Finally save and exit BIOS setup.
5)Turn the system off and then turn the system on. Let the system boot up from the prepared diskette, type the command at the DOS prompt as following:
A:\>AWDFALSH xxxxx.BIN <enter>
(Note: the xxxxx.BIN should be the file you downloaded)6)The first question will be whether you want to back up the original BIOS from your system to a file. Normally, you may answer "N" because the original BIOS file can be found on the diskette bundled with your mainboard when purchasing.
7)The second question needs you to confirm the update BIOS, you need to press "Y" to confirm updating.
8)Once the update is done, you need to power off and on the system.
9)Go back to the BIOS setup and Load Setup Default once again, then change back the settings that you have recorded before.
10)Save and exit the BIOS setup, letting the system boot up successfully.
http://www.qdigrp.com/qdisite/faq_en/showmessage.asp?id=19 -
Danke!! Ich verkneife es mir
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!