Netzwerk

  • Hab meinen 2 rechner mit xp per lan verbunden brauch nun ein programm wo ich sehen kann von einen computer was der andere computer macht!!! also das ich an einen computer beide oberflechen der rechner auswählen kann

    • Anzeige

    Hallo!

    Wenn du gerade an deiner Website arbeitest oder dein aktuelles Hosting überdenkst: Wir betreiben mit NetzLiving eine Hosting-Plattform, die speziell auf Performance, Sicherheit und einfache Verwaltung ausgelegt ist.

    • ✔️ Schnelle Ladezeiten (optimiert für WordPress, WoltLab & Co.)
    • ✔️ Deutsche Server & DSGVO-konform
    • ✔️ Persönlicher Support (kein 0815-Ticket-System)

    Mehr erfahren

  • habs bei chip-online gefunden aber da steht nur das man das überwachen kann kann ich aber den rechner auch steuern und wie schalte ich von einen pc auf den andren?

  • Hi,
    nachdem du VNC gestartet hast, und mit dem Server verbunden bist, öffnet sich ein Fenster auf dem der Desktop des Servers angezeigt wird.
    Sobald du mit der Maus drüberfährst, bewegst du die Maus des Servers.
    Sogar Drag&Drop von einem zum anderen geht und wenn das Fesnter aktiv ist schreibst du auch nur auf dem Server.
    Alles so als wenn du es auf deinem Rechner machst, nur mit einem kleinen Zeitverlusst.

    Brauchst du eine Installationsanleitung für VNC?


    Gruß
    Tutti

    Hier könnte Ihre Werbung stehen!

  • danke, ne brauch ich nicht ich werde es erstmal saugen ich melde mich wenn es probleme gibt

  • Remote Administrator:

    ----------------------------------------------------------------------
    What is Radmin?
    ----------------------------------------------------------------------
    Radmin is a remote control program that lets you work on another
    computer remotely through your own. You see the remote computer's
    screen in a resizable window on your own monitor or as the full
    screen. Your mouse and keyboard control the remote computer so you
    can work on the remote computer just as if you were sitting right at
    it.

    The remote computer can be anywhere on the Internet or in your local
    network. You don't need a fast network connection. Even with a MODEM
    the screen update speed is an acceptable 5-10 screen updates per
    second. If the remote computer is on your LOCAL NETWORK the typical
    speed is from 100 to 500 screen updates per second.

    Often while working in Radmin's full-screen mode, you forget that you
    are working on a REMOTE computer!

    Radmin consists of two parts:

    * The server on the remote computer that sends the remote
    computer's screen display.
    * The client—also called the viewer—that shows the remote screen
    display on your own monitor.

    To get started you need to run Radmin server on the remote computer.
    Then run Radmin client on your own computer. The current version of
    Radmin requires a TCP/IP connection between both computers, so you'll
    need to set this up if they are not already connected.


    ----------------------------------------------------------------------
    What makes it different from other systems?
    ----------------------------------------------------------------------

    The speed: Radmin is much faster than every other remote control system
    available. For example, we tested the widely used VNC (AT&T's Virtual
    Network Computing) and found that Radmin is 150 times faster!

    Radmin outperforms every other known remote control system, including
    pcAnywhere, Timbuktu, Remote Control, LapLink, etc.

    The test was performed on:
    Server: 800 X 600 65535 colors, running Windows NT 4.0 Service
    pack 4
    Client: 800 X 600 256 colors, running Windows 95
    Ethernet 10 Mbit local network.


    ----------------------------------------------------------------------
    Features
    ----------------------------------------------------------------------
    Run as a Service
    Radmin server can work as a SERVICE under Win9X/ME/NT4.0/2000.
    This lets you log a user on or off remotely.

    Multiple Connections Support
    Radmin server supports simultaneous multiple connections to the same
    remote screen.

    Full-Screen, Scaled and Windowed View Modes
    Full-screen mode shows the remote screen full-size on your own monitor
    Scaled mode lets you see the remote screen in a window on your monitor
    scaled to the remote screen's defined size.

    Video Hook Driver Technology is Used
    Radmin uses video hook kernel mode drivers under Windows NT to capture
    screen changes. This boosts the speed to hundreds of screen updates per
    second.

    File Transfer
    Lets you transfer files easily between computers with Windows Explorer
    like interface.

    Remote Shutdown
    Now you don't have to connect in the Full Control mode.

    Telnet Server
    Radmin server provides Telnet access to remote computers (except on
    Win9x).

    Windows NT Security Support
    You can allow remote control, remote view, telnet and file transfer
    access to specific users or user groups from an NT domain. If a user
    logged into a WinNT domain connects to Radmin server, the user's
    current username/password are employed by Radmin viewer to authorize
    a connection to the Radmin server.

    Password Protection
    If Windows NT security support is switched off, access to a remote
    computer is controlled by a password. Radmin uses a challenge-response
    password authentication method based on 128 bit strong encryption.

    128 Bit Strong Encryption of All Data Streams.
    In the version 2.1 encryption is always enabled, it causes just 5%
    performance loss.

    IP Filter
    Allows an access to the Radmin server only from specified IP addresses
    and subnets.

    Radmin Supports High-Resolution Modes
    Display resolutions up to 2048 X 2048 X 32 bit color are supported by
    Radmin.


    ----------------------------------------------------------------------
    System requirements.
    ----------------------------------------------------------------------
    No special requirements for hardware:
    If your computer can run Windows 95 or higher, the program will run.
    It even runs on a 386 with 8 MB RAM.

    NOTE: Radmin still operates successfully when the display, mouse and
    keyboard are disconnected from the remote computer, however some
    computers do not boot successfully without a keyboard plugged in.

    For All Operating Systems (Win9x/ME/NT/2000):
    The computer must have TCP/IP installed, the most-used protocol for
    networking computers.

    Windows NT 4.0:
    Service pack 4 or higher is required.


    ----------------------------------------------------------------------
    Installation.
    ----------------------------------------------------------------------
    Two computers need to be connected by TPC/IP, either on a local network
    or the Internet.
    Radmin must be installed on each computer.

    Before Installation For All Users:
    Uninstall any earlier version of Radmin, before installing a newer
    version.

    For Windows 2000 Users:

    * You need administrator rights to install Radmin Server as a service.

    For Windows NT 4.0 Users:

    * You need administrator rights to install Radmin Server as a service
    and install the driver.
    * Before installing Radmin's video hook driver be sure that any
    other Remote Control software that uses video hook driver
    technology has been removed.
    Running more than one video hook driver can lead to a system crash
    while booting.
    Sample applications that use a video hook driver: NetMeeting 3.0+,
    SMS, Timbuktu.
    If a problem occurs while booting with the Radmin driver, you can
    press the '1' (number one) key repeatedly during booting and the
    Radmin driver will not load.


    ----------------------------------------------------------------------
    Radmin Security
    ----------------------------------------------------------------------

    A lot of attention was paid to security issues in the Radmin design
    from the outset. Here are some reasons that Radmin's operations are
    completely secure:


    * Radmin 2.1 supports Windows NT/2000 user level security. You
    can allow remote control to specific users or user groups.
    * If Windows NT security support is switched off, access to a
    remote computer is restricted by password. Remote Administrator
    uses a challenge-response password authentication method. This
    method is similar to the authentication method used in Windows
    NT, but uses more powerful security keys.
    * Remote Administrator has an encrypted mode, where all data,
    including screen images, mouse movements and keypresses are
    encrypted. 128 bit Twofish encryption is used. Twofish crypto
    is distinguished for its combination of speed, flexibility and
    conservative design.
    * Remote Administrator server has a logging feature. All actions
    are written to the log file.
    * Remote Administrator server has an IP filter table that
    restricts
    remote access to IP addresses and networks you specify.
    * Remote Administrator has a self testing code defence that
    protects the code from being altered.


    ----------------------------------------------------------------------
    How to contact us
    ----------------------------------------------------------------------
    To register, visit our web site (registration page):
    http://www.radmin.com/registration.htm

    You can download a new version from
    http://www.radmin.com/

    Tech support e-mail: support@radmin.com

    You can find complete help in 'help.hlp' file
    ----------------------------------------------------------------------

    MfG Karo

  • Hallo!

    Ein Link zur Anleitung wäre vielleicht besser gewesen?

    Zu VNC:

    Man muss die Software auf allen PCs installieren, die man überwachen will. Dann muss man auf den PCs die man überwachen will auch noch Einstellungen vornehmen, dass sie als Client registriert werden. Ein Passwort sollte/muss man setzen und noch ein paar kleiner (Performance) Einstellungen vornehmen.
    Dann am eigenen Rechner den VNC Viewer starten, die IP des anderen Rechnsers eingeben und das Passwort auch und schon gehts los.

    Ich finde das Programm abe nicht so toll. Es ist zwar Freeware, aber wenn man wirklich über VNC arbeiten will, dauert das länger, denn die Übertragung ist sehr träge.


    mfg raser

  • :?:
    wozu brauchst du da ein programm.?
    unter netzwekumgebung einfach "Arbeitsgruppen computer" anlicken u. schon kannst du den anderen rechner sehen, arbeiten sogar spiele spielen etc.wenn freigegeben ist.

    setter

  • 8-) ,ja kann er dann ja auch.

    ich habe 2 rechner, wenn ich auf den anderen zugriefen will gehe ich so vor. da kann ich alles machen.

    setter

  • Hallo!

    Dass musst du mir jetzt genauer erklären, dass glaub ich nämlich nicht. Wenn ich das so mache wie du das sagst, dann seh ich da einfach die 2 PCs die sich in unserem Netzwerk befinden. Ich kann dann auch den anderen PC zugreifen und auf seiner Platte machen was ich will. Was ich aber nicht kann ist, seine Maus bewegen und sehen was am anderen PC gerade am Bildschirm gemacht wird.


    mfg raser

  • :cry:
    nö, das geht nicht.wozu auch.da habe das dann wohl nicht richtig verstanden.
    das geht doch mit dem mess. whiteboard, oder remoteunterstützung starten

    setter

  • ich wollte mit einem rechner auf den anderen zugreifen und auf den anderen echner programme ausführen und das geht mit deiner mitode die du machen willst Setter geht das nicht

  • Also, wie hier schon gesagt wurde, nimm VNC! Ich hab nen Server, der hier unterm Dach steht, in einem kleinen Hohlraum hinter der Wand unter dem untersten Teil der Dachschräge. Ohne Monitor versteht sich. Und über VNC steuer ich den. Gibt damit keine Probleme.
    VNC ist da die beste Lösung. Probiers am besten mal aus.

    Installieren auf Server und Client. Auf dem Server muss VNC Server installiert und geöffnet sein (Passwort noch eingeben oder weglassen). Dann auf dem Clienten (dort reicht es, wenn VNC ohne Server installiert ist) die interne Netzwerk IP des Servers eingeben, eventuelle Passwort eingeben und schon bist du drauf.
    VNC Server muss also auf dem Rechner installiert sein, den du von einem andern kontrollieren möchtest.

    Und ob du VNC mit oder ohne Server installieren willst, kannst du im normalen Setup angeben.

    :wink:

  • geht das programm auch wenn ich 2 rechner nur mit einen lan kabel verbunden hab oder brauch ich dafür ein hub?

  • achso cool so und dann noch mal ne frage hab jetzt ein internet modem und von den geht ein lan kabel in mein computer wenn ich das kabel in einen hub stecke und davon noch 2 rechner ins hub stecke müsste ich doch mit beiden rechner onlien gehen können oder????

  • Mit einem normalen Hub nicht. Aber mit einem Router (ist ein Hub, an den du auch ein Modem anschließen kannst. Dann können alle Rechner am Hub die Verbindung ins Internet benutzen)

  • oh gut das du das sagt sonst hätte ich bald das falsche gekauft udn wieviel kostet so ein router mit ca 5 anschlüsen?

  • Das kann ich dir nicht sagen... habe selber keinen. Hab nen Rechner als Server der eine Verbindung ins Netz hat. Übers Netzwerk können dann die anderen Rechner surfen (aber nur wenn der Server läuft und online ist).

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!