Vermutlich Schädling(e) am Werk

    • Anzeige

    Hallo!

    Wenn du gerade an deiner Website arbeitest oder dein aktuelles Hosting überdenkst: Wir betreiben mit NetzLiving eine Hosting-Plattform, die speziell auf Performance, Sicherheit und einfache Verwaltung ausgelegt ist.

    • ✔️ Schnelle Ladezeiten (optimiert für WordPress, WoltLab & Co.)
    • ✔️ Deutsche Server & DSGVO-konform
    • ✔️ Persönlicher Support (kein 0815-Ticket-System)

    Mehr erfahren

  • Zitat von Der Leo;964715

    Ich kann leider erst wieder am Donnerstag.

    Dann hoffe ich mal, dass er sich meldet, damit die Sache zum Abschluss gebracht werden kann.

    Bei Dir bedanke ich mich jetzt schon mal sehr für Deine geduldigen Bemühungen und ernenne dich hiermit zu meinem Lieblings-Leo ;) .

    PC: Windows 11 Pro, Intel Core i3 @ 3.60GHz, RAM 16 GB, Grafik MD20433, Festplatte 476GB Intenso SSD Sata III, Sound Card High Definition Audio-Gerät

    Laptop: Windows 11 Pro, Intel Core i3 @ 2.30 GHz, Festplatte SSD 223 GB, Arbeitsspeicher 8 GB DDR 4, Grafikkarte Intel HD Graphics 620

  • Hatte wegen Nachtschicht ziemlich viel um die Ohren - deswegen melde ich mich erst jetzt.
    Das tun:

    • PPFScan.exe starten.
    • In das Texteingabefeld über dem Button Script ausführen folgenden Text einfügen:
    Code
    CREATE_FOLDER->C:\PPFS_Sicherung
    REGISTRY_SAVE->HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Lavasoft Kernexplorer>C:\PPFS_Sicherung\Kernexplorer.reg
    MOVE_FILE_ON_REBOOT->C:\Programme\Lavasoft\Ad-Aware\KernExplorer.sys>C:\PPFS_Sicherung\KernExplorer.sys
    REGISTRY_DELETE_KEY->HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
    ->Lavasoft Kernexplorer
    REBOOT->
    • Klicke dann auf den Button Script ausführen und bestätige die erscheinende Messagebox mit Ja.
    • Der Rechner startet sich danach neu.

    Deinstalliere Kaspersky, anderes Antivirenprogramm installieren. Welches du nimmst, überlasse ich die - solange es nicht MSE ist. Das besser nicht nehmen.

  • Zitat von AHT;964907

    Deinstalliere Kaspersky ...

    Vor oder nach dem PPFScan?

    Zitat von AHT;964907

    ... anderes Antivirenprogramm installieren. Welches du nimmst, überlasse ich die ...

    Wäre AVG aus Deiner Sicht o. k? Bei Avira habe ich mal Riesenprobleme mit der Deinstallation gehabt.

    PC: Windows 11 Pro, Intel Core i3 @ 3.60GHz, RAM 16 GB, Grafik MD20433, Festplatte 476GB Intenso SSD Sata III, Sound Card High Definition Audio-Gerät

    Laptop: Windows 11 Pro, Intel Core i3 @ 2.30 GHz, Festplatte SSD 223 GB, Arbeitsspeicher 8 GB DDR 4, Grafikkarte Intel HD Graphics 620

  • Nach der Installation von AVG noch einmal das tun:
    Malwarebytes Anti-Malware

    Wichtig:

    Deaktiviere vor dem Suchdurchlauf dein Antivirenprogramm.
    Das geht meistens im Systemtray (unten rechts bei der Uhr)

    Rechtsklick auf das Symbol deines AV Programmes und beende es. 

    • Lad dir Malwarebytes von hier
    • Installiere das Programm in den vorgegebenen Pfad.
    • Lehne die Testphase ab
    • Führe ein Update durch (Reiter Aktualisierungen) solange bis die Datenbank auf dem neusten Stand ist.
    • Klicke auf den Reiter Suchlauf --> wähle dort "Vollständigen Suchlauf durchführen" --> klicke auf Scannen.
    • Wenn der Scan beendet ist, klicke auf "Ergebnisse anzeigen".
    • Versichere Dich, dass alle Funde markiert sind und drücke "Entferne Auswahl".
    • Falls ein Neustart verlangt wird so bitte nachkommen.
    • Es wird ein Logfile erstellt.
    • Lade bitte das Log bei File-Upload.net - Ihr kostenloser File Hoster! hoch und poste die Downloadlinks hier im Forum. Nachträglich kannst du den Bericht unter "Log Dateien" finden.
  • Zitat von AHT;964943

    AVG ist OK, wenn du mit dem zurechtkommst.

    Das klingt für mich nicht so, als dass ich es fröhlich installieren würde ;) . Ich hatte es vor längerer Zeit bereits mal im Einsatz und keine Probleme (bemerkt).

    Sprich doch bitte einfach ganz unverbindlich mal eine Empfehlung für eins der vielen Gratisprogramme aus.

    Zusätzlich nutze ich übrigens von Zeit zu Zeit den ESET Online-Scanner.


    Ach so: wie geschrieben, läuft die einjährige Lizenz für das Anti-Viren-Programm in ca. drei Monaten ab und ich hätte sie ohnehin nicht verlängert, aber spricht denn grundsätzlich irgendwas gegen die "Security Suite CBE12"? Probleme (die ich bemerkt habe) gab es nicht.

    PC: Windows 11 Pro, Intel Core i3 @ 3.60GHz, RAM 16 GB, Grafik MD20433, Festplatte 476GB Intenso SSD Sata III, Sound Card High Definition Audio-Gerät

    Laptop: Windows 11 Pro, Intel Core i3 @ 2.30 GHz, Festplatte SSD 223 GB, Arbeitsspeicher 8 GB DDR 4, Grafikkarte Intel HD Graphics 620

  • - PPFScan.exe mit vorgegebener Texteingabe und PC-Neustart durchgeführt
    - Kaspersky deinstalliert
    - AVG installiert
    - AVG vorübergehend deaktiviert
    - Komplett-Scan mit Malwarebytes AntiMalware durchgeführt: keine infizierten Objekte gefunden
    - AVG wieder aktiviert

    PC: Windows 11 Pro, Intel Core i3 @ 3.60GHz, RAM 16 GB, Grafik MD20433, Festplatte 476GB Intenso SSD Sata III, Sound Card High Definition Audio-Gerät

    Laptop: Windows 11 Pro, Intel Core i3 @ 2.30 GHz, Festplatte SSD 223 GB, Arbeitsspeicher 8 GB DDR 4, Grafikkarte Intel HD Graphics 620

  • Nein, stelle seit Beginn der "Behandlung" hier keine Ärgerlichkeiten mehr fest.

    Der Leo äußerte die Vermutung, dass es mit meiner Festplatte zusammenhängen könnte. Ich nutze hin und wieder "Check-Drive" zum Überprüfen. Manchmal sagt es mir auch, dass irgendwo eine Macke ist. Dann kann ich einstellen, dass beim nächsten PC-Start gleich zu Beginn ein Windows-Prüfprogramm läuft und gut ist.

    "Check-Drive" meldet zwar, dass etwas nicht stimmt, aber nicht was. Gibt es eine Möglichkeit, das noch irgendwie zu checken? Da die Fehlermeldung schon öfter kam, scheint da ja in der Tat irgendwas nicht zu stimmen. Selbst habe ich aber bei der Arbeit keine Probleme festgestellt.

    PC: Windows 11 Pro, Intel Core i3 @ 3.60GHz, RAM 16 GB, Grafik MD20433, Festplatte 476GB Intenso SSD Sata III, Sound Card High Definition Audio-Gerät

    Laptop: Windows 11 Pro, Intel Core i3 @ 2.30 GHz, Festplatte SSD 223 GB, Arbeitsspeicher 8 GB DDR 4, Grafikkarte Intel HD Graphics 620

  • Finde die Datei nicht wieder.

    Meinst Du das hier?:

    smartctl 5.41 2011-06-09 r3365 [i686-w64-mingw32-xp-sp3] (sf-win32-5.41-1)
    Copyright (C) 2002-11 by Bruce Allen, smartmontools

    === START OF INFORMATION SECTION ===
    Device Model: ExcelStor Technology J8080S
    Serial Number: PVF804Q5AESAPB
    LU WWN Device Id: 0 000000 000000000
    Firmware Version: P21OABEA
    User Capacity: 80.026.361.856 bytes [80,0 GB]
    Sector Size: 512 bytes logical/physical
    Device is: Not in smartctl database [for details use: -P showall]
    ATA Version is: 7
    ATA Standard is: ATA/ATAPI-7 T13 1532D revision 1
    Local Time is: Wed Mar 20 20:45:56 2013 WN
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled

    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED

    General SMART Values:
    Offline data collection status: (0x00) Offline data collection activity
    was never started.
    Auto Offline Data Collection: Disabled.
    Self-test execution status: ( 0) The previous self-test routine completed
    without error or no self-test has ever
    been run.
    Total time to complete Offline
    data collection: ( 1445) seconds.
    Offline data collection
    capabilities: (0x5b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    No Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 1) minutes.
    Extended self-test routine
    recommended polling time: ( 24) minutes.
    SCT capabilities: (0x003f) SCT Status supported.
    SCT Error Recovery Control supported.
    SCT Feature Control supported.
    SCT Data Table supported.

    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x000b 089 089 016 Pre-fail Always - 3342361
    2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
    3 Spin_Up_Time 0x0007 124 124 024 Pre-fail Always - 161 (Average 161)
    4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 2604
    5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 1
    7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
    8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0
    9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17376
    10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
    12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2599
    192 Power-Off_Retract_Count 0x0032 098 098 000 Old_age Always - 3201
    193 Load_Cycle_Count 0x0012 098 098 000 Old_age Always - 3201
    194 Temperature_Celsius 0x0002 142 142 000 Old_age Always - 42 (Min/Max 15/57)
    196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1
    197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 1
    198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0

    SMART Error Log Version: 1
    ATA Error Count: 2
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
    Powered_Up_Time is measured from power on, and printed as
    DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
    SS=sec, and sss=millisec. It "wraps" after 49.710 days.

    Error 2 occurred at disk power-on lifetime: 14732 hours (613 days + 20 hours)
    When the command that caused the error occurred, the device was active or idle.

    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    -- -- -- -- -- -- --
    40 51 08 df 9c 2a e0 Error: UNC 8 sectors at LBA = 0x002a9cdf = 2792671

    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
    -- -- -- -- -- -- -- -- ---------------- --------------------
    c8 ff 08 df 9c 2a e0 00 02:28:36.900 READ DMA
    c8 ff 08 a7 e5 83 e2 00 02:28:36.800 READ DMA
    c8 ff 08 3f b3 2b e0 00 02:28:36.800 READ DMA
    c8 ff 08 37 47 2e e0 00 02:28:36.800 READ DMA
    c8 ff 08 a7 fa 30 e0 00 02:28:36.800 READ DMA

    Error 1 occurred at disk power-on lifetime: 10104 hours (421 days + 0 hours)
    When the command that caused the error occurred, the device was active or idle.

    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    -- -- -- -- -- -- --
    40 51 08 07 9a 1b e0 Error: UNC 8 sectors at LBA = 0x001b9a07 = 1808903

    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
    -- -- -- -- -- -- -- -- ---------------- --------------------
    c8 00 08 07 9a 1b e0 00 14:51:13.700 READ DMA
    c8 00 08 ef bb 61 e0 00 14:51:13.700 READ DMA
    c8 00 07 9f 40 4e e1 00 14:51:13.700 READ DMA
    c8 00 07 97 40 4e e1 00 14:51:13.700 READ DMA
    c8 00 06 d7 58 26 e1 00 14:51:13.700 READ DMA

    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Extended offline Completed without error 00% 13358 -
    # 2 Extended offline Completed without error 00% 10431 -
    # 3 Short offline Completed without error 00% 5 -

    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.

    PC: Windows 11 Pro, Intel Core i3 @ 3.60GHz, RAM 16 GB, Grafik MD20433, Festplatte 476GB Intenso SSD Sata III, Sound Card High Definition Audio-Gerät

    Laptop: Windows 11 Pro, Intel Core i3 @ 2.30 GHz, Festplatte SSD 223 GB, Arbeitsspeicher 8 GB DDR 4, Grafikkarte Intel HD Graphics 620

  • Ja, genau.
    Platte hat Hardwaredefekt (defekter Sektor).
    Das einmal tun:
    Zum Testen der Festplatte(n) tue folgendes:

    • Arbeitsplatz
    • Rechtsklick auf Laufwerk C:
    • Eigenschaften
    • Registrierkarte Extras
    • Jetzt prüfen
    • Dateisystemfehler... und Fehlerhafte Sektoren... mit Häkchen versehen
    • Starten
    • Auf Nachfrage Prüfung planen lassen!
    • rebooten
    • Festplattentest durchführen lassen!
    • Tue das mit allen Laufwerken!


    Danach den gleichen Test mit GSmartControl noch einmal machen und LOG posten (wie davor).

  • Bist du damit fertig, das tun:

    • PPFScan.exe starten.
    • In das Texteingabefeld über dem Button Script ausführen folgenden Text einfügen:
    Code
    CREATE_FOLDER->C:\PPFS_Tools
    DOWNLOAD->http://winhlp.com/tools/resetdma.vbs>C:\PPFS_Tools\Reset-DMA.vbs
    OPEN->C:\PPFS_Tools\Reset-DMA.vbs
    END->
    • Klicke dann auf den Button Script ausführen und bestätige die erscheinende Messagebox mit Ja.
    • [LEFT]Bestätige die dann erscheinende Messagebox und starte den Rechner neu.[/LEFT]


    Rechner danach neu starten. Testen, ob er wieder irgendwo hängen bleibt.

  • Zitat von AHT;965146

    Danach den gleichen Test mit GSmartControl noch einmal machen und LOG posten (wie davor).


    smartctl 5.41 2011-06-09 r3365 [i686-w64-mingw32-xp-sp3] (sf-win32-5.41-1)
    Copyright (C) 2002-11 by Bruce Allen, smartmontools

    === START OF INFORMATION SECTION ===
    Device Model: ExcelStor Technology J8080S
    Serial Number: PVF804Q5AESAPB
    LU WWN Device Id: 0 000000 000000000
    Firmware Version: P21OABEA
    User Capacity: 80.026.361.856 bytes [80,0 GB]
    Sector Size: 512 bytes logical/physical
    Device is: Not in smartctl database [for details use: -P showall]
    ATA Version is: 7
    ATA Standard is: ATA/ATAPI-7 T13 1532D revision 1
    Local Time is: Wed Mar 20 22:07:25 2013 WN
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled

    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED

    General SMART Values:
    Offline data collection status: (0x00) Offline data collection activity
    was never started.
    Auto Offline Data Collection: Disabled.
    Self-test execution status: ( 0) The previous self-test routine completed
    without error or no self-test has ever
    been run.
    Total time to complete Offline
    data collection: ( 1445) seconds.
    Offline data collection
    capabilities: (0x5b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    No Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 1) minutes.
    Extended self-test routine
    recommended polling time: ( 24) minutes.
    SCT capabilities: (0x003f) SCT Status supported.
    SCT Error Recovery Control supported.
    SCT Feature Control supported.
    SCT Data Table supported.

    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x000b 090 090 016 Pre-fail Always - 589884
    2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
    3 Spin_Up_Time 0x0007 124 124 024 Pre-fail Always - 161 (Average 161)
    4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 2604
    5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 1
    7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
    8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0
    9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17377
    10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
    12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2599
    192 Power-Off_Retract_Count 0x0032 098 098 000 Old_age Always - 3201
    193 Load_Cycle_Count 0x0012 098 098 000 Old_age Always - 3201
    194 Temperature_Celsius 0x0002 127 127 000 Old_age Always - 47 (Min/Max 15/57)
    196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1
    197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 1
    198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0

    SMART Error Log Version: 1
    ATA Error Count: 2
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
    Powered_Up_Time is measured from power on, and printed as
    DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
    SS=sec, and sss=millisec. It "wraps" after 49.710 days.

    Error 2 occurred at disk power-on lifetime: 14732 hours (613 days + 20 hours)
    When the command that caused the error occurred, the device was active or idle.

    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    -- -- -- -- -- -- --
    40 51 08 df 9c 2a e0 Error: UNC 8 sectors at LBA = 0x002a9cdf = 2792671

    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
    -- -- -- -- -- -- -- -- ---------------- --------------------
    c8 ff 08 df 9c 2a e0 00 02:28:36.900 READ DMA
    c8 ff 08 a7 e5 83 e2 00 02:28:36.800 READ DMA
    c8 ff 08 3f b3 2b e0 00 02:28:36.800 READ DMA
    c8 ff 08 37 47 2e e0 00 02:28:36.800 READ DMA
    c8 ff 08 a7 fa 30 e0 00 02:28:36.800 READ DMA

    Error 1 occurred at disk power-on lifetime: 10104 hours (421 days + 0 hours)
    When the command that caused the error occurred, the device was active or idle.

    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    -- -- -- -- -- -- --
    40 51 08 07 9a 1b e0 Error: UNC 8 sectors at LBA = 0x001b9a07 = 1808903

    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
    -- -- -- -- -- -- -- -- ---------------- --------------------
    c8 00 08 07 9a 1b e0 00 14:51:13.700 READ DMA
    c8 00 08 ef bb 61 e0 00 14:51:13.700 READ DMA
    c8 00 07 9f 40 4e e1 00 14:51:13.700 READ DMA
    c8 00 07 97 40 4e e1 00 14:51:13.700 READ DMA
    c8 00 06 d7 58 26 e1 00 14:51:13.700 READ DMA

    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Extended offline Completed without error 00% 13358 -
    # 2 Extended offline Completed without error 00% 10431 -
    # 3 Short offline Completed without error 00% 5 -

    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.

    PC: Windows 11 Pro, Intel Core i3 @ 3.60GHz, RAM 16 GB, Grafik MD20433, Festplatte 476GB Intenso SSD Sata III, Sound Card High Definition Audio-Gerät

    Laptop: Windows 11 Pro, Intel Core i3 @ 2.30 GHz, Festplatte SSD 223 GB, Arbeitsspeicher 8 GB DDR 4, Grafikkarte Intel HD Graphics 620

  • Zitat von AHT;965148

    Bist du damit fertig, das tun:

    • PPFScan.exe starten.
    • In das Texteingabefeld über dem Button Script ausführen folgenden Text einfügen: ...

    Kleine, unwesentliche Anmerkung: es muss wohl heißen "unter", oder?


    Zitat von AHT;965148

    [Rechner danach neu starten. Testen, ob er wieder irgendwo hängen bleibt.


    Nee, weiterhin bisher keine Probleme.

    PC: Windows 11 Pro, Intel Core i3 @ 3.60GHz, RAM 16 GB, Grafik MD20433, Festplatte 476GB Intenso SSD Sata III, Sound Card High Definition Audio-Gerät

    Laptop: Windows 11 Pro, Intel Core i3 @ 2.30 GHz, Festplatte SSD 223 GB, Arbeitsspeicher 8 GB DDR 4, Grafikkarte Intel HD Graphics 620

  • Zitat von AHT;965157

    Einmal die Platte komplett mit AVG scannen.
    Melden, ob der Scan hakt.

    Reibungsloser Scan-Lauf.

    Zitat von AHT;965157

    Platte ist defekt - frühzeitig Daten sichern. Ein Sektor ist defekt.

    Heißt das, dass ich mir besser eine neue Platte anschaffen sollte?

    PC: Windows 11 Pro, Intel Core i3 @ 3.60GHz, RAM 16 GB, Grafik MD20433, Festplatte 476GB Intenso SSD Sata III, Sound Card High Definition Audio-Gerät

    Laptop: Windows 11 Pro, Intel Core i3 @ 2.30 GHz, Festplatte SSD 223 GB, Arbeitsspeicher 8 GB DDR 4, Grafikkarte Intel HD Graphics 620

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!