Hallo,
warte bitte bis AHT sich meldet. Ich kann leider erst wieder am Donnerstag.
Hallo,
warte bitte bis AHT sich meldet. Ich kann leider erst wieder am Donnerstag.
Hallo!
Wenn du gerade an deiner Website arbeitest oder dein aktuelles Hosting überdenkst: Wir betreiben mit NetzLiving eine Hosting-Plattform, die speziell auf Performance, Sicherheit und einfache Verwaltung ausgelegt ist.
Zitat von Der Leo;964715Ich kann leider erst wieder am Donnerstag.
Dann hoffe ich mal, dass er sich meldet, damit die Sache zum Abschluss gebracht werden kann.
Bei Dir bedanke ich mich jetzt schon mal sehr für Deine geduldigen Bemühungen und ernenne dich hiermit zu meinem Lieblings-Leo
.
Hatte wegen Nachtschicht ziemlich viel um die Ohren - deswegen melde ich mich erst jetzt.
Das tun:
CREATE_FOLDER->C:\PPFS_Sicherung
REGISTRY_SAVE->HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Lavasoft Kernexplorer>C:\PPFS_Sicherung\Kernexplorer.reg
MOVE_FILE_ON_REBOOT->C:\Programme\Lavasoft\Ad-Aware\KernExplorer.sys>C:\PPFS_Sicherung\KernExplorer.sys
REGISTRY_DELETE_KEY->HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
->Lavasoft Kernexplorer
REBOOT->
Deinstalliere Kaspersky, anderes Antivirenprogramm installieren. Welches du nimmst, überlasse ich die - solange es nicht MSE ist. Das besser nicht nehmen.
Zitat von AHT;964907Deinstalliere Kaspersky ...
Vor oder nach dem PPFScan?
Zitat von AHT;964907... anderes Antivirenprogramm installieren. Welches du nimmst, überlasse ich die ...
Wäre AVG aus Deiner Sicht o. k? Bei Avira habe ich mal Riesenprobleme mit der Deinstallation gehabt.
Nachher. AVG ist OK, wenn du mit dem zurechtkommst.
Nach der Installation von AVG noch einmal das tun:
Malwarebytes Anti-Malware
Wichtig:
Deaktiviere vor dem Suchdurchlauf dein Antivirenprogramm.
Das geht meistens im Systemtray (unten rechts bei der Uhr)
Rechtsklick auf das Symbol deines AV Programmes und beende es.
Zitat von AHT;964943AVG ist OK, wenn du mit dem zurechtkommst.
Das klingt für mich nicht so, als dass ich es fröhlich installieren würde
. Ich hatte es vor längerer Zeit bereits mal im Einsatz und keine Probleme (bemerkt).
Sprich doch bitte einfach ganz unverbindlich mal eine Empfehlung für eins der vielen Gratisprogramme aus.
Zusätzlich nutze ich übrigens von Zeit zu Zeit den ESET Online-Scanner.
Ach so: wie geschrieben, läuft die einjährige Lizenz für das Anti-Viren-Programm in ca. drei Monaten ab und ich hätte sie ohnehin nicht verlängert, aber spricht denn grundsätzlich irgendwas gegen die "Security Suite CBE12"? Probleme (die ich bemerkt habe) gab es nicht.
Gegen beide Scanner spricht nichts. Womit man selbst am besten zurechtkommt zählt da eher.
Kaspersky würde ich aber einmal komplett entfernen.
- PPFScan.exe mit vorgegebener Texteingabe und PC-Neustart durchgeführt
- Kaspersky deinstalliert
- AVG installiert
- AVG vorübergehend deaktiviert
- Komplett-Scan mit Malwarebytes AntiMalware durchgeführt: keine infizierten Objekte gefunden
- AVG wieder aktiviert
Probiere aus, ob noch irgendwelche Probleme auftreten.
Nein, stelle seit Beginn der "Behandlung" hier keine Ärgerlichkeiten mehr fest.
Der Leo äußerte die Vermutung, dass es mit meiner Festplatte zusammenhängen könnte. Ich nutze hin und wieder "Check-Drive" zum Überprüfen. Manchmal sagt es mir auch, dass irgendwo eine Macke ist. Dann kann ich einstellen, dass beim nächsten PC-Start gleich zu Beginn ein Windows-Prüfprogramm läuft und gut ist.
"Check-Drive" meldet zwar, dass etwas nicht stimmt, aber nicht was. Gibt es eine Möglichkeit, das noch irgendwie zu checken? Da die Fehlermeldung schon öfter kam, scheint da ja in der Tat irgendwas nicht zu stimmen. Selbst habe ich aber bei der Arbeit keine Probleme festgestellt.
Das tun:
Finde die Datei nicht wieder.
Meinst Du das hier?:
smartctl 5.41 2011-06-09 r3365 [i686-w64-mingw32-xp-sp3] (sf-win32-5.41-1)
Copyright (C) 2002-11 by Bruce Allen, smartmontools
=== START OF INFORMATION SECTION ===
Device Model: ExcelStor Technology J8080S
Serial Number: PVF804Q5AESAPB
LU WWN Device Id: 0 000000 000000000
Firmware Version: P21OABEA
User Capacity: 80.026.361.856 bytes [80,0 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 1
Local Time is: Wed Mar 20 20:45:56 2013 WN
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1445) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 24) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 089 089 016 Pre-fail Always - 3342361
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 124 124 024 Pre-fail Always - 161 (Average 161)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 2604
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 1
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17376
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2599
192 Power-Off_Retract_Count 0x0032 098 098 000 Old_age Always - 3201
193 Load_Cycle_Count 0x0012 098 098 000 Old_age Always - 3201
194 Temperature_Celsius 0x0002 142 142 000 Old_age Always - 42 (Min/Max 15/57)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 2
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2 occurred at disk power-on lifetime: 14732 hours (613 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 df 9c 2a e0 Error: UNC 8 sectors at LBA = 0x002a9cdf = 2792671
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 ff 08 df 9c 2a e0 00 02:28:36.900 READ DMA
c8 ff 08 a7 e5 83 e2 00 02:28:36.800 READ DMA
c8 ff 08 3f b3 2b e0 00 02:28:36.800 READ DMA
c8 ff 08 37 47 2e e0 00 02:28:36.800 READ DMA
c8 ff 08 a7 fa 30 e0 00 02:28:36.800 READ DMA
Error 1 occurred at disk power-on lifetime: 10104 hours (421 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 07 9a 1b e0 Error: UNC 8 sectors at LBA = 0x001b9a07 = 1808903
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 07 9a 1b e0 00 14:51:13.700 READ DMA
c8 00 08 ef bb 61 e0 00 14:51:13.700 READ DMA
c8 00 07 9f 40 4e e1 00 14:51:13.700 READ DMA
c8 00 07 97 40 4e e1 00 14:51:13.700 READ DMA
c8 00 06 d7 58 26 e1 00 14:51:13.700 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 13358 -
# 2 Extended offline Completed without error 00% 10431 -
# 3 Short offline Completed without error 00% 5 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Ja, genau.
Platte hat Hardwaredefekt (defekter Sektor).
Das einmal tun:
Zum Testen der Festplatte(n) tue folgendes:
Danach den gleichen Test mit GSmartControl noch einmal machen und LOG posten (wie davor).
Bist du damit fertig, das tun:
CREATE_FOLDER->C:\PPFS_Tools
DOWNLOAD->http://winhlp.com/tools/resetdma.vbs>C:\PPFS_Tools\Reset-DMA.vbs
OPEN->C:\PPFS_Tools\Reset-DMA.vbs
END->
Rechner danach neu starten. Testen, ob er wieder irgendwo hängen bleibt.
Zitat von AHT;965146Danach den gleichen Test mit GSmartControl noch einmal machen und LOG posten (wie davor).
smartctl 5.41 2011-06-09 r3365 [i686-w64-mingw32-xp-sp3] (sf-win32-5.41-1)
Copyright (C) 2002-11 by Bruce Allen, smartmontools
=== START OF INFORMATION SECTION ===
Device Model: ExcelStor Technology J8080S
Serial Number: PVF804Q5AESAPB
LU WWN Device Id: 0 000000 000000000
Firmware Version: P21OABEA
User Capacity: 80.026.361.856 bytes [80,0 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 1
Local Time is: Wed Mar 20 22:07:25 2013 WN
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1445) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 24) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 090 090 016 Pre-fail Always - 589884
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 124 124 024 Pre-fail Always - 161 (Average 161)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 2604
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 1
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17377
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2599
192 Power-Off_Retract_Count 0x0032 098 098 000 Old_age Always - 3201
193 Load_Cycle_Count 0x0012 098 098 000 Old_age Always - 3201
194 Temperature_Celsius 0x0002 127 127 000 Old_age Always - 47 (Min/Max 15/57)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 2
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2 occurred at disk power-on lifetime: 14732 hours (613 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 df 9c 2a e0 Error: UNC 8 sectors at LBA = 0x002a9cdf = 2792671
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 ff 08 df 9c 2a e0 00 02:28:36.900 READ DMA
c8 ff 08 a7 e5 83 e2 00 02:28:36.800 READ DMA
c8 ff 08 3f b3 2b e0 00 02:28:36.800 READ DMA
c8 ff 08 37 47 2e e0 00 02:28:36.800 READ DMA
c8 ff 08 a7 fa 30 e0 00 02:28:36.800 READ DMA
Error 1 occurred at disk power-on lifetime: 10104 hours (421 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 07 9a 1b e0 Error: UNC 8 sectors at LBA = 0x001b9a07 = 1808903
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 07 9a 1b e0 00 14:51:13.700 READ DMA
c8 00 08 ef bb 61 e0 00 14:51:13.700 READ DMA
c8 00 07 9f 40 4e e1 00 14:51:13.700 READ DMA
c8 00 07 97 40 4e e1 00 14:51:13.700 READ DMA
c8 00 06 d7 58 26 e1 00 14:51:13.700 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 13358 -
# 2 Extended offline Completed without error 00% 10431 -
# 3 Short offline Completed without error 00% 5 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Einmal die Platte komplett mit AVG scannen.
Melden, ob der Scan hakt.
Platte ist defekt - frühzeitig Daten sichern. Ein Sektor ist defekt.
Zitat von AHT;965148Bist du damit fertig, das tun:
- PPFScan.exe starten.
- In das Texteingabefeld über dem Button Script ausführen folgenden Text einfügen: ...
Kleine, unwesentliche Anmerkung: es muss wohl heißen "unter", oder?
Zitat von AHT;965148[Rechner danach neu starten. Testen, ob er wieder irgendwo hängen bleibt.
Nee, weiterhin bisher keine Probleme.
Nein - das Textfeld ist über dem Button Script ausführen.
Du musst mit weiterem Datenverlust rechnen. Platte ist, wie gesagt, nicht mehr ganz OK.
Zitat von AHT;965157Einmal die Platte komplett mit AVG scannen.
Melden, ob der Scan hakt.
Reibungsloser Scan-Lauf.
Zitat von AHT;965157Platte ist defekt - frühzeitig Daten sichern. Ein Sektor ist defekt.
Heißt das, dass ich mir besser eine neue Platte anschaffen sollte?
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!